On December 9th, the technical director of Jintai Group, a Hong Kong line manufacturer, conducted an on-site inspection of the company's staple fiber production line to understand the company’s polyester staple fiber production process and finished product performance inspections, and conducted technical exchanges with related company departments on this basis. We decided to start the trial of the FR212, an optical sewing thread upgrade product, in December. This also marks that another upgraded product line of oscillating sewing lines has already stood on the same starting line with the horse material T393, which represents the best level for today's sewing lines. Sewing thread is used to sew all kinds of clothing products and has the dual function of utility and decoration. The quality of the sewing thread not only affects the sewing efficiency, but also affects the quality of the clothing. China is a big country in apparel production and demand. The annual demand for sewing threads is in the hundreds of thousands of tons. However, most domestic high-end sewing lines use imported raw materials. In order to speed up the pace of catching up, Yihua started targeting foreign sewing materials at the best level from 2008, and organized light upgrade products to replace imported materials. In response to the differences in the quality of FR211's replacement of imported T353 products by Coats Group, the integrated research, production, marketing and research team of Light Upgrading Products organizes quality improvement in the aspects of product quality stability, cutting off white powder, tail thread defects, and tangling of rollers. The tailstock wire draws on the operation method of the spunlace production line, strictly controls the time of the pre-spinning plate, does not enter the finished product, and cuts the white powder problem to improve the technology and strengthen the monitoring of the process; Problems, centers, and devices have issued strict management requirements. Through these measures, the product quality of FR211 has been improved and it has been recognized by both domestic and foreign manufacturers. With the efforts of the sales department, many well-known companies have initiated cooperation with the initiative. In May of this year, the chairman of a group company visited and proposed the trial of the FR212, an upgraded rayon sewing machine, to replace the Malay T393. Yihua's development team has fully replaced imported light-emitting wire as the key to enhance corporate image, fully organized the formulating process of additives, and further enhanced the brightness, vividness, and softness of the sewing thread, based on the existing products, respectively. In the months of May, May, and August, the company organized trial production on the spot, repeated trial spinning, continuous improvement, and finally produced products that users accepted. At present, Yihua Optical sewing line upgrade products have completely replaced imported products.
Fine sand recycling machine, also know as fine sand recover device, is a device follows a Sand Washing Machine, as you may know that there is some fine sand mixed with the water after separating the sand from the water, the fine sand recover machine is used to recover the fine sand in the waste water, a pump feed the waste water into the hydro-cyclone, where the fine sand sets down meanwhile the water with clay and dust discharged from the top output, with this fine sand recover device, the manufacturer of sand can reduce there produce cost, increasing their profits. The material of the screen is polyurethane, which is different from common vibrating screen.
Fine Sand Recycling Machine,Sand Recycling Machine,Recycling Equipment,Recycling Machines Henan Mingyuan Heavy Industrial Machinery Company Co., LTD. , https://www.heavyequipmentchina.com
