Elbow Type: 45/90/180Elbow;Return Elbow
Standard: ASME/ANSI B16.9 ANSI/ASME B16.11 ANSI/ASME B16.28
BSEN10253-2 BS EN10253-4 DIN2605 -1 DIN2602-2 GOST 17375-01 GOST 30753-01 ,MSS-SP-75
Size:1/2''~48''(Seamless); 16''~80''(Welded)
Wall thickness: Sch5~Sch160\XXS
Manufacturing process: Hot expending ,pressed , etc.
Material:
Carbon steel:
FSGP PG370W PT370
HIGH YIELD STEEL FOR PIPELINE AND OFFSHORE FITTINGS
Stainless steel:
304/SUS304/UNS S30400/1.4301
304L/UNS S30403/1.4306;
304H/UNS S30409/1.4948;
309S/UNS S30908/1.4833
309H/UNS S30909;
310S/UNS S31008/1.4845;
310H/UNS S31009;
316/UNS S31600/1.4401;
316Ti/UNS S31635/1.4571;
316H/UNS S31609/1.4436;
316L/UNS S31603/1.4404;
316LN/UNS S31653;
317/UNS S31700;
317L/UNS S31703/1.4438;
321/UNS S32100/1.4541;
321H/UNS S32109;
347/UNS S34700/1.4550;
347H/UNS S34709/1.4912;
348/UNS S34800;
Alloy steel:
ASTM A234 WP5/WP9/WP11/WP12/WP22/WP91;
ASTM A860 WPHY42/WPHY52/WPHY60/WPHY65;
ASTM A420 WPL3/WPL6/WPL9;
Duplex steel
ASTM A182 F51/S31803/1.4462;
ASTM A182 F53/S2507/S32750/1.4401;
ASTM A182 F55/S32760/1.4501/Zeron 100;
2205/F60/S32205;
ASTM A182 F44/S31254/254SMO/1.4547;
17-4PH/S17400/1.4542/SUS630/AISI630;
F904L/NO8904/1.4539;
725LN/310MoLN/S31050/1.4466
253MA/S30815/1.4835;
Nickel alloy steel:
Alloy 200/Nickel 200/NO2200/2.4066/ASTM B366 WPN;
Alloy 201/Nickel 201/NO2201/2.4068/ASTM B366 WPNL;
Alloy 400/Monel 400/NO4400/NS111/2.4360/ASTM B366 WPNC;
Alloy K-500/Monel K-500/NO5500/2.475;
Alloy 600/Inconel 600/NO6600/NS333/2.4816;
Alloy 601/Inconel 601/NO6001/2.4851;
Alloy 625/Inconel 625/NO6625/NS336/2.4856;
Alloy 718/Inconel 718/NO7718/GH169/GH4169/2.4668;
Alloy 800/Incoloy 800/NO8800/1.4876;
Alloy 800H/Incoloy 800H/NO8810/1.4958;
Alloy 800HT/Incoloy 800HT/NO8811/1.4959;
Alloy 825/Incoloy 825/NO8825/2.4858/NS142;
Alloy 925/Incoloy 925/NO9925;
Hastelloy C/Alloy C/NO6003/2.4869/NS333;
Alloy C-276/Hastelloy C-276/N10276/2.4819;
Alloy C-4/Hastelloy C-4/NO6455/NS335/2.4610;
Alloy C-22/Hastelloy C-22/NO6022/2.4602;
Alloy C-2000/Hastelloy C-2000/NO6200/2.4675;
Alloy B/Hastelloy B/NS321/N10001;
Alloy B-2/Hastelloy B-2/N10665/NS322/2.4617;
Alloy B-3/Hastelloy B-3/N10675/2.4600;
Alloy X/Hastelloy X/NO6002/2.4665;
Alloy G-30/Hastelloy G-30/NO6030/2.4603;
Alloy X-750/Inconel X-750/NO7750/GH145/2.4669;
Alloy 20/Carpenter 20Cb3/NO8020/NS312/2.4660;
Alloy 31/NO8031/1.4562;
Alloy 901/NO9901/1.4898;
Incoloy 25-6Mo/NO8926/1.4529/Incoloy 926/Alloy 926;
Inconel 783/UNS R30783;
NAS 254NM/NO8367;
Monel 30C
Nimonic 80A/Nickel Alloy 80a/UNS N07080/NA20/2.4631/2.4952
Nimonic 263/NO7263
Nimonic 90/UNS NO7090;
Incoloy 907/GH907;
Nitronic 60/Alloy 218/UNS S21800
Seamless Elbow,Pipe Elbow,Carbon Steel Elbow,Steel Pipe Elbow HeBei GuangHao Pipe Fittings Co .,LTD (Cangzhou Sailing Steel Pipe Co., Ltd) , https://www.guanghaofitting.com
2. Please refer to the manual of intelligent digital temperature controller for temperature control setting.
3, if you need to turn on the lighting switch.
Light incubator | Thermostatic light incubator | Intelligent light incubator maintenance and culture:
1. The incubator housing should be reliably grounded.
2. Incubator should be placed in a cool, dry, well ventilated place away from heat and sunlight. Keep it stable to prevent vibrations from generating noise.
3, in order to ensure that the condenser effectively cooling, the distance between the condenser and the wall should be greater than 100mm. There should be 50mm clearance on the side of the box, and there should be at least 300mm on the top of the box.
4. The incubator should avoid collisions and shake vibrations during handling, maintenance and maintenance; the maximum inclination is less than 45 degrees.
5, the instrument suddenly does not work, please check the fuse tube (after the box) is burned, check the power supply.
6. When the incubator is working in refrigeration, the difference between the temperature in the cabinet and the ambient temperature should not be greater than 25 degrees.
Light incubator | Thermostatic light incubator | Intelligent light incubator temperature control table Key functions 1, the number of period segment keys: click on the cycle number key to switch the display of the current operation cycle or number of segments, long press the key 2S to enter the cycle setting state, and then Press and hold for two seconds to exit.
2. Set query key: Click to enter the query status, you can query the current running number of segments, set time, set temperature and set humidity, and then click this key to exit. Long press this key 2S to enter the segment number selection state. After selecting the segment number, press the key again to enter each segment parameter setting state. In the setting state, press and hold the setting query key 2S again to exit each segment parameter setting state. (When the period is set to 0 and the first period of time is 0, the first program is always run;)
3. Decrease the key: When setting the parameter, click this key to decrease the value by one. Pressing this key for a long time will reduce the value continuously.
4, increase the key, in the setting of parameters, click the key to increase the value of the set, long press the key to set the value will increase continuously;
5. Back (back) key: In each parameter setting state, click this key to return to the previous parameter (you can only switch the parameters of the same paragraph). When the alarm buzzer sounds, press this key to silence. In the operation stop state, long press this key 4S can make the controller start again from the first stage.
6. Temperature parameter (temperature) key: Long press this key 2S to enter internal parameter state, click this key to set internal parameters, and press 2S again to exit.
7, lighting key: Click this key has a lighting box light.
8. Power button: Click this button to enable the controller to work or enter the closed state.
In each setting state, if no key is pressed within 30 seconds, the program will automatically exit to normal operation.
If you have any questions, please contact us: Jintan Guowang Experimental Instrument Factory Telephone Fax E-mail:
Website: http://
.ASTM / ASME A234: WPB - WPC - WP1WP11 - WP12 - WP5 - WP22 - - WP91 CT20 09R2C
ASTM / ASME A/SA 420: WPL6 - WPL3EN 10216-2: P195GH - P235GH - P265GH-P355Nh
20MnNb6 - 16Mo3 - 8MoB5-4 - 14MoV6310CrMo5-5 - 13CrMo4-5 - 10CrMo9-10-15NiCuMoNb5-6-4 - X11CrMo5X11CrMo9-1 - X10CrMoVNb9-1X10CrWMoVNb9-2 - X20CrMoV11-1former BS-DIN-AFNOR equivalent grades)
ASTM A860 / MSS-SP75: WPHY 42WPHY 46 - WPHY 52 - WPHY 60-WPHY 65 - WPHY 70 grades
WPHY 80 only as per MSS-SP75 EN 10208-2: L245NB - L290NBL360NB - L415NB - L360QBL415QB - L450QB - L485QB - L555Q
Instructions and maintenance for various light incubators
Light incubator | Thermostatic light incubator | Smart light incubator Instructions for use: 1, turn on the power, close the power switch, the whole power, the switch power indicator light.