Maximum Load:300.000t
Gantry Crane
is a variation of bridge crane. It is well suited for use in storage yard or
workshop that does not provide corbels for support. Two forms exist for the
product: semi-Goliath and Goliath. With a maximum load handling capacity of
300t,the crane is commonly found at port, storage yard, and outdoor freight
yard, where it is used to load or unload bulk goods or various others.
In a gantry
crane, the main bridge beam is supported by two supporting legs that run along
the rail at the ground level. The main beam can be extended at both ends by using
the girder overhangs so that the peripheral area of workshop can be served.
The crane is
vital to the material handling process. Crane problems may cause downtime and
downtime costs customer`s money. Eurocrane product has always been supplied
with consistent good quality, which is sure to become one of your preferred
choices in logistics industry. Following is a list of main advantage of our
crane product.
We are a
pioneer in the manufacture of European gantry cranes. Drawing on the valued
experience and advanced techniques, we constantly bring revolutionary
innovation to the crane industry. Each product has been rigorously tested prior
to being launched onto the market. Hence Customers can purchase with confidence.
Our product aims to help customers improve productivity, lower equipment
maintenance cost, extend equipment use life, maximize return on the investment,
and create more value for the customers.
In its compact
body, the crane house many desirable attributes such as even load distribution,
light weight, and minimum stress on the rail. It is designed to decrease
construction cost and create ease of maintenance. Compared with other domestic
cranes, our crane allows for 10% to 15% decrease in its dimension according to
the loads that it handles. The heavier the load is ,the more decrease the crane
allows in its dimension. In this way, customer comprehensive investment is
optimized and rewarded with high rate of return.
The compact
design of our gantry crane leaves more space for industrial operation. All its
components are sturdy and long-lasting, requiring limited maintenance.
Reduction in weight and wheel stress leads to decreased energy consumption. It
also lowers the level of requirements on raw materials during its manufacturing
process.
With leading
manufacturing techniques, state-of-the-art manufacturing facilities, integrated
production and strict control and assurance system, we are sure to design and
produce premium-quality gantry cranes with exceptional performance. The concept
of [easy-to-maintenance" is also incorporated into our design to ensure the
final product possesses competitive edges over others of its contemporaries
while allowing easy repair and operation.
Our gantry
crane can be supplied with various configurations to cover a wide range of
lifting capacities, ranging from 8t to over 500t.Other options such as the turn
over hoist,anti-sway device, automatic positioning device, winch servicing and
monitoring device, or remote diagnostic tool are available as well. We also
provide personalized, professional solutions to customers with our experience
and advances techniques.
Gantry Crane Gantry Crane,Rubber Tyre Gantry Crane,Container Gantry Crane,Gantry Crane Eurocrane (China) Co., Ltd. , https://www.craneparts.pl
Salt Lake deposit mining technology
Of Salt Lake deposits are mainly distributed in Qinghai, Tibet, Inner Mongolia, mainly solid deposit of salt resources in Salt Lake halite, Glauber's salt, trona, gypsum, carnallite, sylvite, bischofite column Borate , sodium borate, water boron and so on. Liquid deposits containing potassium, sodium, calcium, magnesium, boron, lithium, bromide, iodide, rubidium, cesium, uranium and other elements. The development and utilization of salt lake mineral resources plays an important role in the national economy.
   First, the characteristics of the salt lake deposit
The modern salt lake deposit is a deposit formed by the accumulation of soluble salts, the concentration of mineralized water and the deposition of salt minerals since the Quaternary. It is divided into solid deposits and liquid (brine) deposits according to the output state of the ore bodies. Two major categories. Solid deposits, according to the geological and hydrogeological conditions generated, include lake chemical deposition, lake sediment deposition, mineralized water redeposition and secondary fissure filling. Liquid deposits, according to the conditions of brine, there are surface brine mines, intercrystalline brine mines and pore brine mines.
Compared with other deposits, the salt lake deposit has the following main features:
(1) Most of the salt lake solids and liquid mines are co-located in a unified geological body, which can be transformed by hydrological and climatic factors. For example, on the northeastern shore of Dabson Lake in Qinghai, the summer lake water is concentrated with new carnallite deposits. It can be used for mining; the lake is desalinated in winter and the carnallite is dissolved. Salt lakes in northern Adelaide, Australia, and salt lakes in southwestern Saskatchewan, Canada, have used this feature for seasonal mining.
(2) The variability, compensation and regenerative properties of the deposits are still continuing. The hydrogeological conditions of the mining area have special significance for the deposit. Low-mineralized water is not only the water-filling factor of the deposit, but also the source of the beneficial components. It has the duality of benefit and harm.
(3) The age of solid deposits is new, with little structural change, without induration and diagenesis, with shallow burial, softness, similar approximation level, relatively stable thickness and grade.
(4) Mineral deposits are generally symbiotic or associated with a variety of minerals, and have comprehensive development and utilization value.
(5) The water quality and quantity of liquid deposits are affected by meteorological and hydrological conditions. It has dynamic characteristics, but the water quality has horizontal and vertical differentiation. For example, in the Chaerhan Salt Lake, the phreatic level of the intercrystalline brine on the northeastern shore of Dalson Lake varies from 0.41 to 0.45 m per year. The intergranular brine of the whole salt lake is concentrated in the horizontal direction from the edge to the center, and is distributed in the form of a ring-shaped strip of stone salt water, high-potassium carnallite water and low-pressure carnallite water (Figs 1, 2, 3); brine type There is also obvious zoning, in the northern and eastern parts of the salt lake, the intergranular brine layer is uniform chloride-type water; the upper part of the south is sulfate and chloride-type brine, the middle and lower parts are chloride-type brine; the upper part of the west is magnesium sulfate. Sub-type brine, the degree of deterioration is deeper. As shown in Fig. 4, the water quality of the intergranular brine in the vertical direction is not only different in different layers, but even in the same layer. Such as 826 holes, the KCl content is 18.5 times different. It can be seen from Fig. 5 that the Na + content decreases with increasing depth, and the Mg + and Cl - contents increase with depth.
Fig.1 Plane distribution of KCl content in intergranular brine of I a layer in Chaerhan Salt Lake
1-KCl content contour; 2-brine vertical differentiation zone; 3-halide horizontal concentration zone; 4-molecule is bore number, denominator is KCl content%
Fig. 2 Plane distribution of MgCl 2 content in intergranular brine of I a layer in Chaerhan Salt Lake
1-MgCl 2 content contour; 2-molecule is the drilling number, and the denominator is MgCl 2 content (%)
Fig.3 Plane distribution of NaCl content in intergranular brine of I a layer in Chaerhan Salt Lake
Fig. 4 Vertical variation of KCl content in I a intergranular brine of Chaerhan Salt Lake
1-KCl>1.0%; 2-KCl=0.5%~1.0%; 3-KCl<0.5;
4-KCl<1.0%; 5-array brine vertical curve; 6-hole number
Fig.5 Vertical variation of intergranular brine composition in CK829 pore of Chaerhan Salt Lake
1-stone salt; 2-carnallite; 3-sand; 4- clay ; 5-sludge; 6-specific gravity curve;
7-K ion concentration curve; 8-Na ion concentration curve; 9-Mg ion concentration curve;
10-SO 4 2 - concentration curves; 11-Cl - concentration curves; 12-Ca + concentration curve
   Second, the mining method of the salt lake deposit
The solid deposit is classified into two types: the open-air method of directly extracting solid ore and the dissolution method of ore-derived solid-liquid conversion in liquid form according to the mining mode and function principle of the ore. Deposits with simple conditions and high ore grades are mined by open-air method; deposits with complex conditions and low ore grades are exploited by dissolution methods using the easy solubility of salt minerals.
The ore body is shallowly buried and soft, and is generally beneficial for mining. When using open pit mining, the development system is simple due to the small amount of stripping work (or no peeling required), and there is no need for perforation blasting in the back mining layer. Therefore, mining, loading and transportation tools play the most crucial role. The problem of water filling and mining tools in mineral deposits is also prominently reflected in the treatment of water. According to the treatment method of filling the deposit, it is divided into pre-draining mining method and non-pre-draining mining method, as listed in Table 1.
Table 1 Salt Lake Solid Deposit Mining Method
Open mining method
Main features of mining methods
Applicable conditions of mining methods
Principle of action and
Ore mining method
Deposit
Water filling treatment
Mechanization of mining
Open-pit mining method for directly extracting solid ore from mechanical equipment
Pre-drain
Non-hydraulic mechanized mining and transportation
Mainly waterproof, use appropriate methods to drain the deposit
Simple deposit conditions, high ore grade, dry lake or water lake, deposits of different depths and thicknesses
Not drained beforehand
Non-hydraulic mechanized mining
Mainly waterproof, the ore is mechanically dehydrated during mining
The surface of the shallow ore deposit or the dry lake layer with high ore grade has bearing capacity
Hydraulic mechanized mining
The process of mining and transportation is mainly water. When the water pipeline is transported, the ore is dehydrated at the outlet of the pipeline.
Medium or thick deposits, dry lakes or water lakes, surface lake water or intercrystalline brines are sufficient for mining and transportation process water
Dissolved mining method for solid or liquid conversion of ore with water or other solvent
Dissolve salt minerals by using water around the deposit or pressurized water at the bottom of the lake as a medium
Pump solution with a suitable type of pump, channel or pipe transport
In-situ mineralization, the useful elements are extracted with the solution, and the water-insoluble matter such as mud and sand is piled up on the spot.
Occurrence conditions are complex, ore grade is low, direct mining can not meet the processing technology requirements, and deposits that cannot be directly mined by conventional methods
The liquid deposit mining method is divided into three types: well type, channel type and well channel combination. The channel mining method is only applicable to submerged aquifers with a buried water depth close to the surface and an aquifer thickness of less than 10 m; liquid ore with a large water depth and a large aquifer thickness is a combination of tube wells or wells. The horizontal zoning and vertical differentiation of the water quality of liquid deposits must be considered when determining the development system, the layout of the mining area, and the mining sequence. Under large-scale mining conditions, it is necessary to break the dynamic balance of brine and the chemical balance of water in the original state. Because of the fluidity and compensability of brine, the halogenated salt of different brines is aggravated. Salt formation in the formation, brine structure and equipment will bring difficulties to the extraction and transportation of brine. Therefore, water quality and quantity must be monitored and forecasted at any time; solid liquid-analytical conversion has advantages and disadvantages and should be utilized and controlled.