Multi-pole tube type wire installation conduit

Multi-pole type trolley wire installation conduit:
1, according to the installation diagram, the catheter, thermal expansion compensation pipe, maintenance catheter, the middle of the power supply segment of the schematic diagram of the position of the order line, in order to facilitate the smooth development of the work.
2. The shaping clip and the hanging clip can be pre-installed on each of the conduits. When lifting, the hanging position of the hanging clip can be adjusted, and the guide rail can be parallel to the movement track of the receiving machine. The tolerance of the horizontal height at the suspension bracket is 2mm, and the horizontal distance is 4mm.
3, rail connection, there are two types of hinge connection and docking. The joint screws must be tightened to prevent loosening so as to avoid overheating when the current is passed through. The inner surface of the guide rails must be in the same plane to make the transition smooth. When the conductors are pushed repeatedly at the joints, they should not impede the feeling of obstruction. If necessary, Fine trowel can be used to trim to a smooth transition. The connection weight of the guide rail is the key to the installation quality of the trolley wire and must be carefully handled.
4. The connection of the catheter is made with a connecting clip. The lower edge of the connecting clip is embedded in the guide tube groove to ensure the coaxiality of the two catheters.
5. Install the end or middle cable box clothing end cap, the end cable box and the wither cover should be fixed by screws.
6, install the fork, fork can be welded or bolted to the transmission arm, the transmission arm is installed on the conductive device, the surface and the center of the catheter should be kept at a distance of about 100mm. The fork is inserted into the conductor and should be allowed to swing freely up and down the entire line. Its range is 40mm and can absorb transmission errors and shocks in other directions.
7. When switching on the power supply, pay attention to the following items:
(1) Review the installation status of the entire line before power on. After confirmation, the commissioning personnel can enter the operation position, and other personnel should evacuate the site or enter a safe area.
(2) After the power is turned on, do not rush to start the crane, observe the static electricity is normal, and then start the car motor, test run two minutes, then start the big car motor, driving at low speed, along the entire line of observation, should pay special attention to the part of the movement The possibility of rubbing with brackets, cement columns, etc., should be corrected immediately if any of the following conditions are found:
a. If there is a large change in the catheter, adjust the catheter or correct the fork.
b. When the conductor runs abnormally, check whether the rail connection point is flat.

Product Features:

1. Thicken welded steel tubes, the thickness is at the top of CNC Router industry in China. The 4 X8 cnc router is the basic size, also available size of 5 X 10 cnc router, 6 X 10 cnc router etc size.
2. 3kw or more power HSD spindle or water cooling type. This one is with no maintenance, 6000-18000rpm.
3. The gantry is constructed of tubular steel with reinforcing ribs welded throughout the length of the column which results in a steady firm beam assembly. This quality engineering and workmanship result in smooth precision cutting.
4. Taiwan rail linear bearing ,double slippers,bearing heavy,working steadily.
5. Stepper motors are motion systems allowing to have a high positioning precision. With their high power already at low speed, their stall torque and the possibility to divide the steps in microsteps, stepper motors can provide direct and precise motions in a small volume.

Specifications of SCT wood Engraver CNC Router:

 

Applicable Industry:

SCT Woodworking CNC Router,enjoying a high reputation in the market, is popular with many customers from different countries.

1. Woodworking industry:

Three dimensional wave plate processing, cupboard doors, wooden doors, window processing, vedio game cabinets and panels,Computer table and furniture auxiliary processing.

2. Advertising industry:

Advertising signs, logo production, acrylic, plastic cutting, production of decorative materials, forming system module, etc.

3. Furniture industry,

Solid wood furniture, solid wood doors, decorative materials, computer tables, panel furniture, office furniture, wooden.

 

Option: 

1) Dust collector

2) Vacuum table

3) Rotary ( for engraving round objects)

4) DSP controller

Model SCT-W1325

Work Piece size

1300x2500x200 [mm]

Working Axes

3 axes, Horizontal & Vertical

Machine Floor area

3.5 [m]x 2.5 [m],

Work Piece clamping

Vacuum table

MainUsed Materials

Formica Topped plywood, 6-20 [mm] thick.  MDF, 4-28 [mm] thick

Tools Replacement

Non-Automatic different Tools Can be used

Working Speed

15000 [mm/m],min.

Rapid Travel speed

30000 [mm/m], min.

Sawdust Removal

Required

Working Accuracy

±0.05 [mm], min.

Repositioning Accuracy

±0.05 [mm], min.

Working Power

AC220V/380V/50HZ

Software Capabilities

Artcam User Friendly, Supports English, 3D CAD format (STEP-), Optimization for maximal Raw material usage, quick set up.

Noise Level

85 [db(a)] max,, 88 [db(a)] max,  for short time operations only.

Measured Within a: 40 [m2] x 2.5 [m] max. Space

Spindle

3kw water cooling spindle


Rotary Axis for cylinder materials optional:

 
Samples:
china XYZ 3 Axis 3d automatic cnc wood engraving machine SCT-W1325
china XYZ 3 Axis 3d automatic cnc wood engraving machine SCT-W1325
Packaging & Shipping

They are firstly greased thoroughly and packaged in a free-fumigation wooden crate. At SCT we strive to make your buying experience as convenient as possible. We work directly with shipping companies to ensure the best price for the shipment and we pass those savings on to you. Please notify salesperson at the time of your quote request if you wish to arrange for your own shipping method.

china XYZ 3 Axis 3d automatic cnc wood engraving machine SCT-W1325china XYZ 3 Axis 3d automatic cnc wood engraving machine SCT-W1325

 

Our Services

 

Guarantee
CNC Router–full 12 months back to base warranty on the router cnc and relevant manufacturers warranty on 3rd party add ons. This covers electrical and mechanical parts under `normal use`.

 

After-sales service
•Guarantee one year (except for consumable parts)
•Whole lifetime free service
•Technical support online or remote control
•Free tutorial and training courses (in video or in factory)
•Spare parts discount


CNC Router

CNC Router,CNC Wood Router,CNC Engraving Router,Small CNC Router

Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com