In all beneficiation production lines, the probability of failure of the crusher is the highest, which is closely related to the working nature of the crusher. Take the cone crusher, because the cone crusher operates in a harsh environment, the dust is relatively large, and the maintenance is not in place during the use process. In the process of daily use of the cone crusher, various kinds of Kind of problem. In the daily use of the cone crusher, it is often encountered that the discharge particle size is too large, and the expected effect is not achieved, which makes the manufacturer suffer a headache. How to solve the problem that the cone crusher is too large in the process of daily use? In the process of using the cone crusher, the problem of excessive particle size is caused, mainly because the hammerhead of the cone crusher is excessively worn or the sieve bar is broken. The solution is very simple. The factors caused by the replacement of the hammer or the corresponding replacement of the sieve can be. After the cone crusher has not been working for a certain period of time, it should be properly inspected and repaired, so that the cone crusher will maintain a very good working condition in subsequent production, achieving very good production capacity and finished product quality.
The machine adopts front, back, left and right double tilting mechanism to complete casting pouring in the process of variable speed tilting. The technology is conducive to the exhaust of mould and filling of liquid metal in the casting process. It can improve the internal quality of castings and the yield of castings.
The equipment has a high degree of automation, simple operation and maintenance. Suitable for the production of a variety of small aluminum alloy castings, such as power steering gear.
Casting Finishing Process Machine White Sewing Machine,Sand Core Crushing Machine,High Rate Band Saw Machine,Casting Finishing Process Machine Shandong ShengKaiYuan Intelligent Technology Co.Ltd , https://www.cncastmachine.com
How to solve the problem that the cone crusher has too large particle size
For a relatively large beneficiation line, all components must be in normal operation to ensure the production efficiency of the entire beneficiation line. If there is a problem with one part, it may cause the entire production line to be in a state of paralysis.