Sprinkler structure introduction

1. Power take-off device 2, water pump 3, water tank 4, communication valve 5, fire ball valve 6, filter net 7, front flush valve 8, water spray valve 9, side spray valve 10, rear shower valve 11, and water spray gun 12 , Tank cover 13, front punch, 14, side spray lotus head 15, rear sprinkler 16, anti-rotation plate ABC, three-way four-position valve , tank body of sprinkler tank structure, the tank is elliptic cylindrical or The square type is made of steel plate. The tank body of the vehicle body is 2-3 rooms. The bottom of the middle partition plate has through holes. The partition plate in the warehouse has anti-wave function. To reduce the impact of liquid in the tank when the car is running. An anti-rotation plate is installed at the water outlet to prevent whirlpools from impacting water pressure when water is sprayed. Appearance painted anti-rust paint and decorative paint.
Second, tank mouth tank assembly: a large cover bolted to the tank door neck plate, connected by a support pin and a small cover plate, clockwise rotation of the handle above the small cover can be compacted. After reversing, when the ear plate is disengaged, the small cap can be opened. The large cap has a hole of 30, so that the pressure in the tank is basically the same as the atmospheric pressure during the process of adding water.
Third, the power take-off and the various models of gearbox matching dedicated power take-off, pneumatic operation or manual operation, operation switch back pull, take the force of the teeth into the gearing position, drive the water pump through the drive shaft, the switch back to the position, The pump stops working.
Fourth, the pump Self-priming impeller pump system special pump.
V. Ball valve The sprinkler is equipped with 7 Φ50mm stainless steel ball valves, and 7, 8, 9 and 10 in the figure are used for regulating the spraying of water. Φ50mm aluminum tank ball valve, 4 in the figure to control the pumping or sprinkling, open when pumping, close when watering. Φ65mm fire ball valve, can be connected to the fire belt for emergency use.
6. Sprinklers Sprinklers have duck-billed or round-headed nozzles in front of them, cylindrical water spittoons on the back, and shower heads on the side. The rear of the car is equipped with an overhead spray gun.
The water sprayer is generally used for flushing the streets and plays a role of dust removal and cooling. The sprayer can change the spraying direction and angle of the water sprayer by adjusting the nozzle thread. The spray gun can be used for urban and rural landscape afforestation and the role of emergency fire trucks. . The puff nozzle can pour the dust from the middle water sprayer to clean the air.
Buy sprinkler, sewage suction truck, suction truck, garbage truck, in Hubei Cheng Li! Corporate website:

PET flakes / fibers / chips recycling granulator

PET flakes,Chips Recycling Granulator,Fibers Recycling Granulator

Lanhang Machinery Co., Ltd. , http://www.rh-plasticgranulator.com