Embroidery,Shiny Sequin Lace Fabric,Cotton Twill Fabric,Plaid Embroidery Eyelt Fabric Shaoxing MingFang Textile Co., Ltd , https://www.printingsfabric.com
Toyota Corolla Maintenance – Oil Change
Are you due for an oil change on your Toyota Corolla? If you're looking to save money and do it yourself, this guide will walk you through the entire process step by step. Whether you're a beginner or have done it before, this detailed tutorial is perfect for anyone who wants to keep their car running smoothly.
Before you start, make sure you're working on a flat, clean surface with good lighting. You'll need a few basic tools and supplies, including:
- A socket set
- An oil filter wrench or socket
- An oil collection pan
- 4 quarts of motor oil (check your owner’s manual for the correct type)
- A new oil filter
- A funnel
- Rags
Toyota recommends changing your oil every 6 months or 5,000 miles, unless you're using 0W-20 synthetic oil, which can go up to 1 year or 10,000 miles. It's always a good idea to follow the manufacturer’s guidelines and stay consistent with your maintenance schedule.
Here’s how to perform an oil change on your Toyota Corolla:
1. Locate the oil drain plug under the engine.
2. Place an oil collection pan underneath the plug.
3. Use a 14mm socket and wrench to loosen the drain plug.
4. Remove the plug completely to let all the old oil drain out.
5. Find the oil filter and use an oil filter tool to remove it.
6. Let any remaining oil from the filter drip into the pan.
7. Wipe around the oil filter housing with a rag.
8. Apply a thin layer of new oil to the edge of the new oil filter.
9. Install the new filter by hand, tightening it just enough—not too tight.
10. Reinstall the drain plug and tighten it securely (but not over-tight).
11. Open the hood and pour in 3.5 to 4 quarts of fresh oil using a funnel.
12. Check the dipstick to ensure the oil level is correct.
After completing the oil change, don’t forget to reset the maintenance light. Turn the key to the ACC position, set the odometer to “Mileage,†then turn off the key. Press and hold the trip button while turning the key back to ACC. The light should blink and reset once you release the button.
That’s it! Your Toyota Corolla is now ready to roll with fresh oil and a clean engine. For more DIY car maintenance tips, check out these related posts:
- [Toyota Camry Maintenance – Oil Change](link)
- [Toyota Tundra Maintenance – Change Oil and Oil Filter](link)
- [Toyota Sienna Maintenance – Replace Cabin Air Filter](link)
- [Scion tC Maintenance – Shock and Spring Replacement](link)
- [Toyota FJ Cruiser Maintenance – Replace Spark Plugs](link)
- [Toyota Tundra Maintenance – Change Brake Pads](link)
Keep your car in top condition with regular maintenance—your wallet (and your engine) will thank you.