The radar level gauge is available in stainless steel and stainless steel with a PTFE and plastic body. The material is selected correctly based on the medium temperature, pressure and corrosion strength. In the chemical enterprise application * more, it is the advantage is that the display is intuitive, safe and reliable, and less failure. The main wood is to be used for medium level detection of various towers, tanks, tanks, spherical vessels and boilers. It compensates for the defects such as poor definition and easy cracking of the glass plate (tube) level gauge, and the whole process measurement has no blind zone, and the display is clear and the measurement range is large. How to detect good or bad radar level gauge: 1. Remove the flange of the float chamber and insert the float into the float chamber in the upward direction of the arrow (the upper part of the magnetic steel in the float), reinstall the flange of the float chamber, pay attention to the gasket and evenly tighten it; 2. Block the flange of the radar level gauge and slowly inject the clean water into the float chamber from the upper flange. If the indicator should have a liquid level indication and it is sensitive and does not jump, the level gauge displays normal; 3. If the indicator is a tracking indicator, the indicator tool magnet can be used to attract the indicator float to couple with the magnetic float in the float chamber (float indicator) or to attract the indicator from bottom to top with magnetic steel to make it correct. Explosion-proof type: withstand * large working pressure: 10Mpa or less, * high working temperature: 120 °C, measuring range: 0~12m, measuring medium density: 0.5~1.8 g/cm3, default process connection: flange connection, display panel installation default Direction: Forward facing. Anti-frost type: withstand * large working pressure: 10Mpa or less, * high working temperature: 80 ° C, measuring range: 0 ~ 12m measuring medium density: 0.5 ~ 1.8 g / cm3, default process connection: flange connection, display panel installation default Direction: Forward facing the flange. Ordinary type: working pressure: normal pressure below 1.0Mpa, * high working temperature: 80 °C, measuring range: 0~12m, measuring medium density: 0.5~1.8 g/cm3, default process connection: flange connection, display panel installation default Direction: Forward facing the flange. Anti-corrosion type: working pressure: below 10Mpa * high working temperature: 80 ° C, measuring range: 0~12m, measuring medium density: 0.5~1.8 g/cm3, default process connection: flange connection, display panel installation default direction: forward back For the flange.
FMFQ(S)double mill is widely used for wheat flour milling,as well as corn,broomcorn,brewage,feedstuff milling in large and medium-sized flour factories.
Structure features:
The series of flour mill is mainly used for wheat milling and material crushing in corn,rice,cayenne,food,medical,chemical industry.The Complete Set Of Equipment is perfect in establishing small and medium flour factories.
If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inquiry,Please send mail directly to us.
Flour Machine Grinding Equipment Flour Machine Grinding Equipment,Single Flour Milling Machine,Single Type Flour Grinding Machine,Single Flour Milling Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com
It has adopted new design and compact structure affording good performances and high efficiency.
The machine is made of manganese plate with cast iron base to work smoothly.Synchronou eltdrive and eccentric wheel make an efficient structure to extend its useful life.
Manual and pneumatic control makes an easy operation.
The charging system motor single driving makes sure of milling after charging.
The grinding roller bearing is dismantled easily by hydraulic pressure instead of manual hammering,so that it can keep a fine precision
