Handheld Metal Detector always match archway metal detectors. Since after somebody walk through a Metal Detector Gate, guard people use it to accurately fix the specific place on your body. People like Super Scanner Metal Detector so much. Hand-Held Metal Detector protect people's life from being hurt and property being damaged by terrorism. Chinese Held held Metal Detector is cheap but also good in use. And also offer 1 year warranty, it worth your choice! Handheld Metal Detector Handheld Metal Detector,Hand-Held Metal Detector,Handheld Security Metal Detector,Electric Metal Detector Handheld Shenzhen Mama Security Technology Co., Ltd. , https://www.mamasecurity.com
Mixing shaftÂ
The mixing shaft made from smithing alloy steel. They have the best torsion-bent intension. mixer
Drive device
Drive device drived by two-planetary gear boxes. And this kind of design has advantages of compact configuration, stabilized driving, low noise and long used life.
Shaft sealing
The mixing shaft has long life because they are sealed by two reliable face seals and the others unique seal which combine high pressure grease.
Automatic grease lubrication
Distributor will distribute grease from grease pump to all lubricated points. High grease pressure, bigger vicidity and smaller grease consumption. These can decrease the grease stain to concrete.
Mixing device
Thanks for the mixing arms are streamline both in axial and in radial ,the material in trough not only is cut in radial but also is pushed in axial, so that it is mixer more turbulent and can reach the homogeneity in short time. For the unique design to mixing system it can save cement.
Hydraulic discharging device
Hydraulic discharging can avoid some disadvantages with pneumatic discharging device like not opening the discharging door because of low air pressure. When the discharging door in the half opened .we can set the opening door device at a random angle. and if it is in emergency, we can open the discharging door by pressing the manual-discharging door by pressing the manual discharging knob.
Item
Type
JS1500/1000
JS2250/1500
JS3000/2000
JS4500/3000
JS6000/4000
JS6750/4500
JS7500/5000
Intput capacity(L)
1500
2250
3000
4500
6000
6750
7500
Output capacity(L)
1000
1500
2000
3000
4000
4500
5000
Power(kw)
37
2*30
2*37
2*55
2*75
2*75
2*90
Peddles number
2*7
2*8
2*8
2*9
2*11
2*12
2*14
Weight(kg)
5500
6500
7600
9800
13000
14500
16500
ABOUTÂ US:
As your one-stop source, AT PRECAST,we design, manufacturer and distribute precast concrete accessories including the Lifting Systems and Anchoring systems Coil and Ferrule Inserts. for Concrete and Prefabricated area.
As a leader in developing concrete accessory products, our main goal is to produce products that are safer, faster and more cost efficient.
With more than totally 50 years working experience, our entire staff is dedicated to provide you with the best customer service and competitive prices. Our sales force are able to answer your questions quickly and offer you technical support .
FAQs
1. Where is your location?
We are located in Qingdao City of China and are closed to Airport. It takes 30minuts by car from Liuting Airport our company.
2. How long has the company been established?
AT INDUSTRY was established in 2009. There is 6 years exporting experiences.
3. How many employees do you have?
Administration / sales   4
Engineering / design as our partner    8
Production as our partners 120
Quality assurance / inspection  10
4. Which countries do you export to?
U.S.A, Germany, France, Italy, UK, Brazil, Middle east of Asia, Thailand,
5. What proportion of your goods are exported?
100% of our production are exported to all over the world.
6. How long does it take to receive samples?
a) Pattern:30-45days after orderÂ
b) Sample:30days after pattern finishing.
c) The lead time is the general production period and does not include the transportation time.
7. New product development process
Got tooling order and sample order with 50% deposit---Hold a meeting with the relation dept. to ensure the developing schedule---Design pattern, fixture and gauge and making them in our house---mold steel buying---Machining---Inspection---Send out the sample with initial inspection report.
8. How long is the manufacturing lead time?
Mass Production:Â 90days after sample approval by yours.
The lead time is the general production period including the transportation time.
We could make some special production arrangement effectively if customer has urgent need.
9. What basis can we buy goods?
We generally offer customers prices FOB& CIF (Carriage, Insurance & Freight). The CIF includes the freight cost to your nominated sea port.
We do provide clearance of goods which needs to be handled by a local freight forwarder.
All local costs and taxes are the responsibility of the buyer. We are happy to offer advisement on shipping if required.
10. What are the payment terms?
Payment terms are negotiable and will improve for long term customers.
During the initial stages, we request 50% of tooling fee in advance with the balance payable on acceptance of samples.
Production orders can be negotiable. We prefer 50% deposit and the balance by T/T before sails. But sometimes T/T 30 days after sails would also acceptable.
11. Which currency can we buy in?
We can deal in USD / Euro currency / GBP.
12. How long does it take to ship goods from China by sea?
It takes about 5 weeks to European ports plus 1 week customs clearance, so you can get the container within 6 to 7 weeks. It takes about 2 weeks to east coast and 3 weeks to west coast US ports. All sea goods are shipped from Qingdao Port.
13. How long does it take to ship goods from China by air?
It takes about 7 days to all major destinations.
14. Can we visit the factory to conduct an audit?
Yes, you are welcome to visit our partner factory by prior agreement.
15. How do we retain client confidentiality?
We are happy to sign Confidentiality Agreements with customers and will honor them.
16. Which languages do we do business in?
Although we do business with many countries around the world, we can only communicate effectively in Chinese English.
All information supplied should therefore be supplied in this form.
17. Is there a minimum volume of business required to conduct international purchasing?
There are no minimum volumes, but the prices of the goods, plus the fixed costs of importing makes it more economical to buy in high volumes. All potential customers will be assessed on an individual basis to determine if it appears a viable option for all parties to develop a relationship.
18. What type of parts you are specialized in?
Our business contains two areas,
one is for construction precast including lifting system, rigging hardware metal parts.
Â
Another is customized metal business of quality sand castings, investment castings, lost foam castings, hot forgings, cold forgings, stampings, machined parts, injectionmolded plastics parts, etc.
19. Which kind of equipments do you have?
Forging friction press 160Ton, 300Ton, 630Ton, 1200Ton
Casting furnace of 200kg, 500kg,1000kgs, 2000kgs
Press of 63ton, 120tons
CNC Machining center
CNC Vertical Lathe
CNC Lathe center
Boring machine
Drilling machine
Â
Mixing shaftÂ
The mixing shaft made from smithing alloy steel. They have the best torsion-bent intension. mixer
Drive device
Drive device drived by two-planetary gear boxes. And this kind of design has advantages of compact configuration, stabilized driving, low noise and long used life.
Shaft sealing
The mixing shaft has long life because they are sealed by two reliable face seals and the others unique seal which combine high pressure grease.
Automatic grease lubrication
Distributor will distribute grease from grease pump to all lubricated points. High grease pressure, bigger vicidity and smaller grease consumption. These can decrease the grease stain to concrete.
Mixing device
Thanks for the mixing arms are streamline both in axial and in radial ,the material in trough not only is cut in radial but also is pushed in axial, so that it is mixer more turbulent and can reach the homogeneity in short time. For the unique design to mixing system it can save cement.
Hydraulic discharging device
Hydraulic discharging can avoid some disadvantages with pneumatic discharging device like not opening the discharging door because of low air pressure. When the discharging door in the half opened .we can set the opening door device at a random angle. and if it is in emergency, we can open the discharging door by pressing the manual-discharging door by pressing the manual discharging knob.
Item
Type
JS1500/1000
JS2250/1500
JS3000/2000
JS4500/3000
JS6000/4000
JS6750/4500
JS7500/5000
Intput capacity(L)
1500
2250
3000
4500
6000
6750
7500
Output capacity(L)
1000
1500
2000
3000
4000
4500
5000
Power(kw)
37
2*30
2*37
2*55
2*75
2*75
2*90
Peddles number
2*7
2*8
2*8
2*9
2*11
2*12
2*14
Weight(kg)
5500
6500
7600
9800
13000
14500
16500
ABOUTÂ US:
As your one-stop source, AT PRECAST,we design, manufacturer and distribute precast concrete accessories including the Lifting Systems and Anchoring systems Coil and Ferrule Inserts. for Concrete and Prefabricated area.
As a leader in developing concrete accessory products, our main goal is to produce products that are safer, faster and more cost efficient.
With more than totally 50 years working experience, our entire staff is dedicated to provide you with the best customer service and competitive prices. Our sales force are able to answer your questions quickly and offer you technical support .
FAQs
1. Where is your location?
We are located in Qingdao City of China and are closed to Airport. It takes 30minuts by car from Liuting Airport our company.
2. How long has the company been established?
AT INDUSTRY was established in 2009. There is 6 years exporting experiences.
3. How many employees do you have?
Administration / sales   4
Engineering / design as our partner    8
Production as our partners 120
Quality assurance / inspection  10
4. Which countries do you export to?
U.S.A, Germany, France, Italy, UK, Brazil, Middle east of Asia, Thailand,
5. What proportion of your goods are exported?
100% of our production are exported to all over the world.
6. How long does it take to receive samples?
a) Pattern:30-45days after orderÂ
b) Sample:30days after pattern finishing.
c) The lead time is the general production period and does not include the transportation time.
7. New product development process
Got tooling order and sample order with 50% deposit---Hold a meeting with the relation dept. to ensure the developing schedule---Design pattern, fixture and gauge and making them in our house---mold steel buying---Machining---Inspection---Send out the sample with initial inspection report.
8. How long is the manufacturing lead time?
Mass Production:Â 90days after sample approval by yours.
The lead time is the general production period including the transportation time.
We could make some special production arrangement effectively if customer has urgent need.
9. What basis can we buy goods?
We generally offer customers prices FOB& CIF (Carriage, Insurance & Freight). The CIF includes the freight cost to your nominated sea port.
We do provide clearance of goods which needs to be handled by a local freight forwarder.
All local costs and taxes are the responsibility of the buyer. We are happy to offer advisement on shipping if required.
10. What are the payment terms?
Payment terms are negotiable and will improve for long term customers.
During the initial stages, we request 50% of tooling fee in advance with the balance payable on acceptance of samples.
Production orders can be negotiable. We prefer 50% deposit and the balance by T/T before sails. But sometimes T/T 30 days after sails would also acceptable.
11. Which currency can we buy in?
We can deal in USD / Euro currency / GBP.
12. How long does it take to ship goods from China by sea?
It takes about 5 weeks to European ports plus 1 week customs clearance, so you can get the container within 6 to 7 weeks. It takes about 2 weeks to east coast and 3 weeks to west coast US ports. All sea goods are shipped from Qingdao Port.
13. How long does it take to ship goods from China by air?
It takes about 7 days to all major destinations.
14. Can we visit the factory to conduct an audit?
Yes, you are welcome to visit our partner factory by prior agreement.
15. How do we retain client confidentiality?
We are happy to sign Confidentiality Agreements with customers and will honor them.
16. Which languages do we do business in?
Although we do business with many countries around the world, we can only communicate effectively in Chinese English.
All information supplied should therefore be supplied in this form.
17. Is there a minimum volume of business required to conduct international purchasing?
There are no minimum volumes, but the prices of the goods, plus the fixed costs of importing makes it more economical to buy in high volumes. All potential customers will be assessed on an individual basis to determine if it appears a viable option for all parties to develop a relationship.
18. What type of parts you are specialized in?
Our business contains two areas,
one is for construction precast including lifting system, rigging hardware metal parts.
Â
Another is customized metal business of quality sand castings, investment castings, lost foam castings, hot forgings, cold forgings, stampings, machined parts, injectionmolded plastics parts, etc.
19. Which kind of equipments do you have?
Forging friction press 160Ton, 300Ton, 630Ton, 1200Ton
Casting furnace of 200kg, 500kg,1000kgs, 2000kgs
Press of 63ton, 120tons
CNC Machining center
CNC Vertical Lathe
CNC Lathe center
Boring machine
Drilling machine
Â
Twin-Shaft Mixer with High Quality
Model NO.: CTS
Vibrating Amplitude: 1.2mm
Certification: CE
Condition: New
Color: White
Original: China
Shipping Port: Qingdao, China
Trade Mark: at OEM ODM
Package: Container
Trademark: AT
Transport Package: Container
Specification: CE SGS ISO
Origin: China
HS Code: 73269090
Model NO.: CTS
Vibrating Amplitude: 1.2mm
Certification: CE
Condition: New
Color: White
Original: China
Shipping Port: Qingdao, China
Trade Mark: at OEM ODM
Package: Container
Trademark: AT
Transport Package: Container
Specification: CE SGS ISO
Origin: China
HS Code: 73269090