Round stainless steel rod

Round Stainless Steel Rod

Stainless steel rods are available in a variety of shapes, including flat, hexagonal, square, and round. The choice of shape depends on the application requirements, such as structural strength, aesthetics, or mechanical performance.

The surface roughness of hot-rolled stainless steel round bars is generally higher compared to cold-drawn ones. This is typically not an issue when the bar is used for its mechanical properties like strength and corrosion resistance. However, for applications where appearance and finish matter—such as outdoor fixtures, architectural components, or decorative elements—cold-drawn stainless steel round bars are preferred due to their smooth surface and lower roughness values. These bars come in a wide range of sizes, with typical diameters ranging from 5mm to 450mm. For detailed pricing and size specifications, feel free to contact us.

Key Features of Stainless Steel Round Bars:

  • Excellent corrosion resistance
  • High tensile strength
  • Good dimensional stability
  • Resistance to high temperatures
  • Long service life
  • High resistance to mechanical stress
  • Easy to fabricate and machine

Specifications of Stainless Steel Round Bar

Stainless Steel Material Grade
  • 17/4PH Round Bar
  • FV520B Round Bar
  • S31254 Round Bar
  • 904L Round Bar
  • 310 Stainless Steel Round Bar
  • 321 Stainless Steel Round Bar
  • Stainless Steel 304 Round Bar
  • Stainless Steel 316 Round Bar
  • SS 440B Round Bar
  • SS 440C Round Bar
  • SS 420 Round Bar
  • AISI 410 Round Bar
  • AISI 416 Round Bar
  • AISI 431 Round Bar
  • S31803 Round Bar
  • S32760 Round Bar
Stainless Steel Round Bar Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
SS Standard ASTM A276, ASME SA276, ASTM A479, ASME SA479
Stainless Steel Round Bar Size Diameter: 3mm to 800mm
SUS Flat Bar Size Thickness: 2 - 100mm
Width: 10 to 500mm
SS Angle Bar Size 3mm*20mm*20mm to 12mm*100mm*100mm
Stainless Steel Channel Bar 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
SUS Rectangular Bars Section 3.0 to 12.0mm thickness
SS Threaded Bar Billet Size 1/2 to 495mm Diameter
Stainless Steel Rectangles Size 33 x 30mm to 295 x 1066mm
ASTM A276 Type Hollow Bar 32mm OD x 16mm ID to 250mm OD x 200mm ID
SS Black Bar Standard Dimensions Diameter / Height:
ASTM A276 Type Hollow Bar Tolerance H8, H9, H10, H11, H12, K9, K10, K11, K12 or as per client’s request
SS Hex Bars Finish Cold (bright) drawn, centerless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, rough turned, bright, polished, grinding, centerless ground & black
SUS T-Bar Surface Hot rolled pickled, bright, sand blasting finished, cold drawn, hairline, polished
Rolled Stainless Steel Flat Bars Condition Hardened & tempered, annealed
ASTM A276 Type Cold Rolled Bar Technique Cold drawn, hot rolled, forged, cold rolled, rod
SS Rod Processing Bar cutting to 650mm
Stainless Steel Rounds Bar Form Rod, round, channel bar, T-bar, flat bar, precision ground bar, blocks, square, rings, round rod, triangle, hollow, rectangle, threaded, hex (A/F), profiles, half round bar, ingot, billet, I/H bar, forging, etc.
Our stainless steel round bar complies with NACE MR0175/ISO 15156 standards.

Chemical Composition of Stainless Steel Round Bar:

ASTM Grade C Mn Si S P Cr Ni Mo Other
304 0.08 max 2.00 max 0.75 max 0.030 max 0.045 max 18.0–20.0 8.0–11.0 – –
316 0.08 max 2.00 max 0.75 max 0.030 max 0.045 max 16.0–18.0 10.0–14.0 2.0–3.0 –
317L 0.035 max 2.00 max 0.75 max 0.030 max 0.045 max 18.0–20.0 11.0–14.0 3.0–4.0 –
310 S 0.08 max 2.00 max 1.5 max 0.030 max 0.045 max 24.0–26.0 19.0–22.0 3.0–4.0 –
347 H 0.04–0.10 2.00 max 0.75 max 0.030 max 0.045 max 17.0–19.0 9.0–13.0 – 10C(Cb+Ta) < 1.10%
321 0.08 2.00 max 0.75 max 0.030 max 0.045 max 17.0–20.0 9.0–12.0 – 5C 0.70%

Mechanical Properties of Stainless Steel Round Bar:

Grade Tensile Strength Yield Strength (0.2% Offset) Elongation Density Melting Point
SS 304 Round Bar Psi – 75000, MPa – 515 Psi – 30000, MPa – 205 40% 8.0 g/cm³ 1400°C (2550°F)
SS 202 Round Bar 515 MPa 275 MPa 40% 8.0 g/cm³ 1454°C (2650°F)
SS 303 Round Bar Psi – 85,000 Psi – 45,000 50% 55% Rb 180
SS 304L Round Bar Psi – 75000, MPa – 515 Psi – 30000, MPa – 205 40% 8.0 g/cm³ 1400°C (2550°F)
SS 316 Round Bar Psi – 75000, MPa – 515 Psi – 30000, MPa – 205 35% 8.0 g/cm³ 1454°C (2650°F)
SS 316L Round Bar 485 Min 170 Min. 40% 8.0 g/cm³ 1400°C (2550°F)

Physical Properties of Stainless Steel Round Bar:

Tensile Psi (MPa) Yield Psi (MPa) Elongation Strip / Round Hardness Reduction in Area (%)
75000 (515) 30000 (205) 30 – 40
75000 (515) 30000 (250) 30 – 40
75000 (515) 30000 (250) 30 – 40
75000 (515) 30000 (250) 30 – 40
75000 (515) 30000 (250) 30 – 40
75000 (515) 30000 (250) 30 – 40

Hot Rolled Stainless Steel Round Bar Equivalent Grades

UNS
AISI
Werkstoff
Outokumpu
ASTM
S31254
904L
1.4547
254SMO
A276
N08904
1.4539
6Mo (Moly)
A479
EN10272
B677
F44

Stainless Steel Redrawing Wire

Stainless Steel Redrawing Wire,High Tensile Strength Wire,Redrawing Wire Annealing Wire,Soft Bright Redrawing Wire

Jiangsu Manrui New Materials Co., Ltd , https://www.manruiwire.com