Home central air-conditioning ceiling how much storey?

If it is the transformation of an old house or the decoration of a new house, home central air conditioning can be installed, but many owners worry that after the installation of home central air conditioning will not be enough? So how much space does the home central air-conditioning ceiling need? After installation, how high should the home central air-conditioning be? With these questions, we will answer them one by one today.

First, home central air conditioning size:

The common domestic central air-conditioning ducts are basically 200mm thick. Of course, the size and thickness are not specified. The duct thicknesses of different manufacturers are also different. Therefore, when installing, it is more important to pay attention to where the fan coil is installed. The power consumption in different locations is not the same, and it also has some impact on cooling and comfort.

Second, home central air conditioning ceiling space:

Before installation, it is necessary to clearly understand the height of the house. If the height is not enough, everything will not be discussed. At present, in the newly-buy house, the developer will reserve part of the floor height for the owners to install air-conditioning and floor heating. The basic home central air-conditioning ceiling will occupy about 10-20cm of the floor height. When installing, it needs more attention. It is a place to be reserved between the pipeline and the indoor host when the central air conditioner is installed. Avoid noise caused by collisions between pipes and pipes.

Third, home central air conditioning for height

Some owners, worried that the storey height is not enough, will put the central air-conditioning indoor unit in a very high position all at once. Generally, the indoor unit is suitable for 1.8 to 2.2 meters from the ground. If it exceeds this height, not only Affects air conditioning, refrigeration, and comfort. It also causes great difficulties for the after-sales staff in the post-maintenance.

All in all, the general floor plan can also be installed with central air conditioning at a height of about 2.6 meters. If the height of the floor is too short, you do not need to worry about it. You can use a partial ceiling or use a vertical wind disk to install it.

Svedala Jaw Plate

Svedala jaw crusher is a single toggle plate compound pendulum structure, design and manufacturing aspects to pay attention to detail features. We use the essence of fusion of traditional techniques with the latest scientific and technological achievements.
Rack side rolled steel plate is employed, the fixed jaw and movable jaw are made of box-shaped castings, to give a high rigidity / weight ratio. Sweeping the fillet welds and provided low stress areas, the maximum to avoid stress concentration. Compared with the screw connection structure, the advantages of a welded structure of the frame body in their respective directions consistent strength, better durability, and maintenance-free characteristics of the impact load, so the risk of failure of the rack down lowest.

Svedala Jaw Plate,Svedala Jaw Plate Crusher Parts,Svedala Jaw Plate Jm1206,Svedala Jaw Plate Jm1108

Ma An Shan Shi Bo Da Jing Shen Machinery Co.,ltd , https://www.bodamachinery.com