Booster Cable belongs to the auto parts. Best Way use good quality metal material to produce the clamps of Booster Cable. The material of clamp should be durable,wear-resistant and good in electrical conductivity. If car's cigarette lighter plug works well, the battery clip can be used to assist starting the power. The Booster Cable can be directly used to charge the car,or work as a connection line which is convenient for charging and start-up. Booster Cable Jumping Car Battery,Booster Cable Wire,Power Booster Cable,Truck Battery Booster,Jumper Cable Ningbo Best Way Auto Accessory Co., Ltd. , https://www.autoaccessorycn.com
which is also called table concentrator, is a mine separation device for fine minerals working by gravity. They are effective in processing precious and base metal, rare metal and non-metallic minerals, widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc.
Put the raw materials into the feeding launder, and put some water in to make it into slurry of concentration of 20% to 25%, and gravity flow to the deck. The particle group become loose and layered because of the rinsing of water and shaking of the deck in the bed ditch. After the layered, the upper particle and the bottom particle move in different direction because of the different pressure of flowing water and the friction of the bed surface. The upper light particle moves downward along the transverse of bed surface result of the stronger flowing water., this side called tailing side. The heavy mineral particles which located in the bottom of bed layer was influenced by differential movement of bed surface, thus them move to the opposite of the drive end, and we call this point concentrate side. Because of the different density, granularity, and the directions of movement, the groups of mineral particles spread in Fan-shaped along the diagonal of the feeding launder. The production discharge along the edge of bed surface, the discharge line is so long, so that shaking table could produce many kinds of different quality product precisely.
Separating precisely is the prominent advantage of shaking table. We can get some final concentrate, final tailings and 1Â or 2Â kinds of middling product after the first separating from raw mineral. The enrichment ratio of concentrate is very good, when dealing with low grade tungsten ore and tin ore, the enrichment ratio could reach about 300 times. Besides, the range of separating particle size effectively in dealing with metallic ore is 2Â to 0.02 mm.
Features
* High recovery ratio
* High concentration ratio
* Easy installation
*Simple operation
* Deck constructed of fiber glass
* Seven different decks to   choose
* Long working life
* Adjustable stroke length and speed
Construction and mechanical features
Head Motion   Gandong shaking tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication.This feature protects the moving parts, reducing operating and maintenance costs to a minimum.
Decks   The decks are constructed of steel framework and covered 16mm fiberglass with emery, this cover its strength reaches as high as 70% of steel, the features of this design are stronger, wear-resistant,
corrosion-resistant, and no distortion, it lengthens the working-life of machine and thus allows machine perform perfectly on different mineral and different weather condition.
Support types  Traditionary type, 10# channel steel support or 20# channel steel support are available.
Feed and Water Box   A wooden feed distributing box with hopper and a long water
box are attached to the iron of the deck, giving a very even distribution of feed and water.
Technical Specification  The Gandong Shaking Tables have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5 mm to 2Â mm; the fine sand deck is designed for recovering fine particles in the range of 0.074
mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.02 mm to 0.074 mm.
Support types  Traditionary type, 10# channel steel support or 20# channel steel support are available.
Feed and Water Box   A wooden feed distributing box with hopper and a long water
box are attached to the iron of the deck, giving a very even distribution of feed and water.
Technical Specification  The Gandong Shaking Tables have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5 mm to 2Â mm; the fine sand deck is designed for recovering fine particles in the range of 0.074
mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.02 mm to 0.074 mm.
Â
Model
6-S 7.6
6-S 4.08
6-S 1.95
6-S 0.5
Deck type
Coarse ore Deck
Fine sand
DeckSlime Deck
Three different kinds of decks are available
Beneficiation area (m2)
7.6
7.6
7.6
4.08
1.95
0.5
Deck Size
Length (mm)
4500
4500
4500
3000
2100
1100
Transmission end width (mm)
1850
1850
1850
1320
1050
500
Concentrate end width (mm)
1550
1550
1550
1100
850
430
Maximum feeding size (mm)
2
0.5
0.074
Sand -2
Slime -0.1Sand -2
Slime -0.074Sand -2
Slime -0.074
Capacity (t/h)
1-1.8
0.5-1
0.3-0.5
0.4-1.5
0.3-0.8
0.05-0.2
Feeding density (%)
20-30
18-25
15-20
10-30
Stroke (mm)
16-22
11-16
8-16
6-30
12-28
9-17
Frequency of stroke (r/min)
220
250
280
210-320
250-450
280-460
Water consumption (t/h)
0.7-1
0.4-0.7
0.4-0.7
0.3-1.5
0.2-1
0.1-0.5
Groove shape of deck
Rectangular
Saw-tooth
Triangle
Available Rectangular, Saw-tooth, Triangle
Power (Kw)
1.1
1.1
1.1
1.1
1.1
0.55
Why choose our company machine?
1. We are factory (NOT Dealer)
All machinery from Well-tech international equipment Mining Machinery Manufactory are made by ourselves, No trade company make
Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).
So please buy from factory
2. We will do our best to satisfy every customer's needs
Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.
3. Training &Â service
Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
4. If you are new for this business, IÂ will help you
Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on
5. We will recommend a suitable type for you and send you a best quotation
Our Services
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.
For more details, please send me inquiry below, we will reply you within in 24hour,or you can call me, my cell is +86 183 7987 3189.
Â
Thanks for your time.
Gravity Separation 6-S Shaking Table
which is also called table concentrator, is a mine separation device for fine minerals working by gravity. They are effective in processing precious and base metal, rare metal and non-metallic minerals, widely used in separation for Gold, Silver, Tin, Columbium, Tantalum, Titanium, Barium, Tungsten, Iron, Chrome, Manganese, Zircon, Lead, Zinc, Mercury, Copper, Aluminum, etc.
Put the raw materials into the feeding launder, and put some water in to make it into slurry of concentration of 20% to 25%, and gravity flow to the deck. The particle group become loose and layered because of the rinsing of water and shaking of the deck in the bed ditch. After the layered, the upper particle and the bottom particle move in different direction because of the different pressure of flowing water and the friction of the bed surface. The upper light particle moves downward along the transverse of bed surface result of the stronger flowing water., this side called tailing side. The heavy mineral particles which located in the bottom of bed layer was influenced by differential movement of bed surface, thus them move to the opposite of the drive end, and we call this point concentrate side. Because of the different density, granularity, and the directions of movement, the groups of mineral particles spread in Fan-shaped along the diagonal of the feeding launder. The production discharge along the edge of bed surface, the discharge line is so long, so that shaking table could produce many kinds of different quality product precisely.
Separating precisely is the prominent advantage of shaking table. We can get some final concentrate, final tailings and 1Â or 2Â kinds of middling product after the first separating from raw mineral. The enrichment ratio of concentrate is very good, when dealing with low grade tungsten ore and tin ore, the enrichment ratio could reach about 300 times. Besides, the range of separating particle size effectively in dealing with metallic ore is 2Â to 0.02 mm.
Features
* High recovery ratio
* High concentration ratio
* Easy installation
*Simple operation
* Deck constructed of fiber glass
* Seven different decks to   choose
* Long working life
* Adjustable stroke length and speed
Construction and mechanical features
Head Motion   Gandong shaking tables are furnished with a totally enclosed self-oiling head motion of heavy cast iron to contain an oil reservoir for perfect splash lubrication.This feature protects the moving parts, reducing operating and maintenance costs to a minimum.
Decks   The decks are constructed of steel framework and covered 16mm fiberglass with emery, this cover its strength reaches as high as 70% of steel, the features of this design are stronger, wear-resistant,
corrosion-resistant, and no distortion, it lengthens the working-life of machine and thus allows machine perform perfectly on different mineral and different weather condition.
Support types  Traditionary type, 10# channel steel support or 20# channel steel support are available.
Feed and Water Box   A wooden feed distributing box with hopper and a long water
box are attached to the iron of the deck, giving a very even distribution of feed and water.
Technical Specification  The Gandong Shaking Tables have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5 mm to 2Â mm; the fine sand deck is designed for recovering fine particles in the range of 0.074
mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.02 mm to 0.074 mm.
Support types  Traditionary type, 10# channel steel support or 20# channel steel support are available.
Feed and Water Box   A wooden feed distributing box with hopper and a long water
box are attached to the iron of the deck, giving a very even distribution of feed and water.
Technical Specification  The Gandong Shaking Tables have three distinct deck designs available.
The coarse ore deck is designed for recovering particles size from 0.5 mm to 2Â mm; the fine sand deck is designed for recovering fine particles in the range of 0.074
mm to 0.5 mm; the slime deck is designed for recovering super extremely fine particles in the range of 0.02 mm to 0.074 mm.
Â
Model
6-S 7.6
6-S 4.08
6-S 1.95
6-S 0.5
Deck type
Coarse ore Deck
Fine sand
DeckSlime Deck
Three different kinds of decks are available
Beneficiation area (m2)
7.6
7.6
7.6
4.08
1.95
0.5
Deck Size
Length (mm)
4500
4500
4500
3000
2100
1100
Transmission end width (mm)
1850
1850
1850
1320
1050
500
Concentrate end width (mm)
1550
1550
1550
1100
850
430
Maximum feeding size (mm)
2
0.5
0.074
Sand -2
Slime -0.1Sand -2
Slime -0.074Sand -2
Slime -0.074
Capacity (t/h)
1-1.8
0.5-1
0.3-0.5
0.4-1.5
0.3-0.8
0.05-0.2
Feeding density (%)
20-30
18-25
15-20
10-30
Stroke (mm)
16-22
11-16
8-16
6-30
12-28
9-17
Frequency of stroke (r/min)
220
250
280
210-320
250-450
280-460
Water consumption (t/h)
0.7-1
0.4-0.7
0.4-0.7
0.3-1.5
0.2-1
0.1-0.5
Groove shape of deck
Rectangular
Saw-tooth
Triangle
Available Rectangular, Saw-tooth, Triangle
Power (Kw)
1.1
1.1
1.1
1.1
1.1
0.55
Why choose our company machine?
1. We are factory (NOT Dealer)
All machinery from Well-tech international equipment Mining Machinery Manufactory are made by ourselves, No trade company make
Commission(many trade companies do not produce the machinery),the lower price with the same goods, good quality, after service can be assured (after service of trade companies will get help from factory).
So please buy from factory
2. We will do our best to satisfy every customer's needs
Producing high-quality and reliable machines is our first priority, because we know that our success depends entirely on the satisfaction of our customers. We never give-up quality to save cost.
3. Training &Â service
Training is FREE to every customer. Whenever you need us, for installation, maintenance, or proper use of our company machines, we will be right there for you. In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.
4. If you are new for this business, IÂ will help you
Many thanks for your trust; we can provide you with the pre-services of design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments, drilling rig, Loader, trucks, excavators and so on
5. We will recommend a suitable type for you and send you a best quotation
Our Services
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.
For more details, please send me inquiry below, we will reply you within in 24hour,or you can call me, my cell is +86 183 7987 3189.
Â
Thanks for your time.
Best Way provides the Power Booster Cable both for car,Van,SUV and truck. We have 100A.200A.300A.400A.500A.600A.700A.800A.900A.1000A.1500A,etc. We can provide customized production depends on your detailed requirements, such as wire length, amps,clamp types,package,etc.
Gold Machine Shaking Table Separator
Model NO.: 6-S7.6/4.8/1.95
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Black
Customized: Customized
Condition: New
Coarse Deck: Separation 2-0.5mm Mineral Particle
Fine Sand Deck: Separation 0.5-0.074mm Mineral Particle
Slime Deck: Separation 0.074mm Mineral Particle
Application: Gold, Silver, Tin, Columbium, Tantalum, Titanium
Testing: Supply
Flowchart: Supply
Spare Parts: Supply
Installation: Supply
Delivery Time: 30 Days
Trademark: Gangdong
Transport Package: Standard Export Packing
Specification: ISO9001: 2008&SGS
Origin: Jiangxi China
HS Code: 84741000
Model NO.: 6-S7.6/4.8/1.95
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Black
Customized: Customized
Condition: New
Coarse Deck: Separation 2-0.5mm Mineral Particle
Fine Sand Deck: Separation 0.5-0.074mm Mineral Particle
Slime Deck: Separation 0.074mm Mineral Particle
Application: Gold, Silver, Tin, Columbium, Tantalum, Titanium
Testing: Supply
Flowchart: Supply
Spare Parts: Supply
Installation: Supply
Delivery Time: 30 Days
Trademark: Gangdong
Transport Package: Standard Export Packing
Specification: ISO9001: 2008&SGS
Origin: Jiangxi China
HS Code: 84741000
Gravity Separation 6-S Shaking Table