The Y27-1500 frame type hydraulic press has been installed since September 1, 2014, completed installation on September 30, 2014, and successfully tested on January 15, 2015, fully demonstrating Fangyuan Group's requirements for precision machining of large parts. And the strong processing capacity marks the birth of another new large-scale product of Fangyuan Group, which has opened up new product areas for the company. At the trial of the new product, Gao Xiu, Chairman of the Fangyuan Group's Board of Directors, extended his warm congratulations on the successful test run of the Y27-1500 frame hydraulic press and expressed his sincere gratitude to all the staff involved in product development. It was pointed out that the Y27-1500 frame type hydraulic press was successfully tested, demonstrating Fangyuan’s emphasis on science and technology, respect for talents, and the persistent pursuit of product development. We hope that through today’s ceremony, we will further stimulate and mobilize the enthusiasm of all units to participate in scientific and technological innovation and product development, especially in the severe market situation, attach great importance to technological innovation, product development, small reforms, and rationalization of recommended activities in the market. We seek for our survival path in the cracks and make our due contribution to the steady development of Fangyuan Group. (This article comes from Fang Yuan Group Propaganda Department Wang Xinjun clicks into the Fangyuan Group's online purchase page )
The internal structural design is vane, vane damper is more suitable for soft close. ABD vane dampers are used to dampen drives, control speed, and many other applications. The damping direction of the vane dampers with continuous rotation can be clockwise, counter clockwise, or in both directions. Vane dampers are widely used in automobile interior decoration, household electric appliances, furniture and bathroom products, etc. Our dampers can make the movement of structures soft, quiet and safe to mitigate the impact, avoid the damage, increase the mechanical life, reduce noise, and improve product quality.
NOTE:
1. Please contact the corresponding product engineer for specific torque products.
2.The Standard of completion closing:the angle is 90° between Shaft A and Shaft B.
3.It is closing position to assemble the shaft into the housing.
4. Max. cycle rate: 3 cycles/min(Clockwise110 °, 110 ° anti-clockwise for 1 cycle)
5.Operating temperature:0~40℃
6.Storage temperature:-10~60℃
Soft closing time test: Measure the closing time from angle 70 to 0.
Rated Torque (T).
Test Temperature: 23±2℃.
Durability test:
Test Method: From the closing position to opening position, push back to 70°, soft close from 70° to 0°.
Rated Torque (T).
Operation Angle: 0°~110°.
Test Temperature: 23±2℃.
Durability test cycle: 50,000 cycles. The result of product test )>2s.
Vane Damper,High Temperature Dampers,Toilet Seat Vane Damper,Soft Down Damper,Storage Boxes Vane Damper Shenzhen ABD Equipment Co., Ltd. , https://www.abddamper.com
Y27-1500 frame type hydraulic press is designed for a living frame type structure. It has the features of light vibration and high precision. It has a wide range of versatility and is applicable to the press forming process of plastic materials, such as punching, bending, flanging, sheet stretching. Such as, can also be used for correction, press-fitting, cold extrusion metal parts molding, plastic products and powder products press molding process.
Fangyuan Group Y-27-1500 Frame Hydraulic Press Test Drive Successful
Fangyuan Group Y-27-1500 Frame Hydraulic Press Test Drive Successful
Fangyuan Group Y-27-1500 Frame Hydraulic Press Test Drive Successful
When the axis of rotation is moving, the blades that are connected to the axis of rotation rotate at the same time. The silicone oil in the oil chamber is squeezed between the blade andthe body to the back of the blade. The resistance formed by the pressure of the silicone oil to the area of the blade is the damping torque of the rotating shaft and the blade. The torque generated during rotation is determined by the oil viscosity, the pressure area of the blade and the clearance between the blade and the body.
Fangyuan Group Y-27-1500 Frame Hydraulic Press Test Drive Successful
On January 15, another new product of the Fangyuan Group, the Y27-1500 frame hydraulic press, was successfully tested.
Related News: Fangyuan Group Machinery New Products