So, you've finally received the box with your brand-new Delfast Top 3.0. Congrats! It was a long wait, but it's all worth it now. After several months of anticipation, your electric bike is finally here. Can you believe it? It’s sitting right there in that big box!

Of course, you’re eager to hop on and start riding. That’s completely understandable. You're going to love this premium e-bike, and your friends will be impressed by its sleek design and powerful performance. But before you can hit the road, there are a few simple steps to follow for assembly. Don’t worry — they’re easy and straightforward.

• Unpack the e-bike and all the components from the box
• Install the battery
• Check and inflate the tire pressure
• Attach the wheel
• Mount the front light and mirrors

We’ve made the unboxing process as smooth as possible, and we even created a video to guide you through the setup. If you prefer reading, the instructions below will walk you through each step. In just a few minutes, you’ll be ready to ride your new Delfast Top 3.0 anywhere you want — whether it's on the street or off-road.

Unpack Everything Carefully

Start by opening the box gently. Remove all the small packages inside along with the main bike. Make sure you take everything out and lay it out in one place so you don’t miss any parts.

Install the Battery

Using a screwdriver, remove the lid on the left side of the e-bike. Then, take off the metal plate covering the battery compartment. Place the battery next to the bike and connect the cables as shown in the manual. Gently slide the battery into its spot. Be careful — the battery is quite heavy.

Before you ride for the first time, make sure to fully charge the battery. Always use the official Delfast charger. Using another charger could damage the battery. Once it's installed, replace the metal plate and the lid securely.

Check the Tire Pressure

Use a pressure gauge to check the tire pressure. Refer to the manual to find the recommended pressure level. Proper inflation ensures better performance and safety while riding.

Attach the Wheel

Remove the screws and nuts that hold the axle in place. Pull the axle halfway out so you can position the wheel correctly. Slide the axle through the wheel hole and secure both sides with the clamps. Finally, tighten the axle nuts to ensure stability.

Install the Front Light

Take the front light from its packaging and mount it at the front of the bike. Use the two small screws provided to fix it firmly to the frame.

Mount the Front Mirrors

After the front light is in place, install the front mirrors. Take them out of their box and attach them to their respective sides. Just screw them on — it's a quick and easy process.

Final Touches and Ready to Ride

Adjust the seat height and apply the decal on the battery cover. Your Delfast Top 3.0 is now fully assembled and ready to go. Turn it on, and you're all set to enjoy your new electric bike!