As a leading enterprise in the galvanized & pre-painted industry in china. Shandong Xinghan Materail Corporation with an annual output of 1 million tons of picking coils. 1 million tons of cold roll. 800,000 tons of hot-dipped galvanized and galvalume steel sheets. 450,000 tons of thicker galvanized steeel sheets.300,000 tons of pre-painted steel sheets. occupies a stable leading position in the industry.
The company has 4 set of cutting and corrugate machines, Plain sheets thickness range is 0.12mm-3.3mm, width range 750-1250mm.
Metal Plain Sheet,Plain Steel Plate,Plain Steel Sheet,Galvanized Plain Sheet SHANDONG XINGHAN MATERIAL CORPORATION , https://www.xinghansteel.com
Construction machinery needs long-term storage should pay attention to the problem
Long-term storage of construction machinery, must do the following points: (1) should be parked in a dry room. Had to stop outside, should be elected flat ground and planted wood. Cover with cover cloth after parking. (2) Before long-term storage, the machinery shall be serviced, the damaged parts repaired, and the parts cleaned up thoroughly to maintain the technical condition in good condition. (3) Arrangements and arrangements at the airport should ensure that any one of the machinery is not affected by other mechanical access. (4) The mechanical fuel lever should be placed in idle position, the joystick placed in neutral position. (5) Engine storage. â‘ let go of the engine cooling water. â‘¡ replace the engine oil. The new oil is usually neutral, will not corrode the metal parts of the engine. â‘¢ fuel tank full of diesel to avoid rusting the fuel tank. Preservatives should be added where applicable. â‘£ In the downtime should be started once a month, the engine, so that machinery for a short distance driving, so that all parts of the lubrication to establish a new film to prevent rust. It should be noted: before start-up should be filled with cooling water, the end should be depleted of cooling water. (6) storage of batteries. â‘ should remove the battery, the battery placed in the dry and antifreeze Department. To keep the surface clean and dry, it is forbidden to place conductive objects on the battery. When removing the battery, first cut off the negative line, and then cut off the positive line; install the first positive line connected, then the negative line. Due to construction machinery electrical systems are negative ground, which is to prevent disassembly caused when the battery short circuit. â‘¡ lead-acid batteries should be charged once a month. (7) rust treatment. â‘ before storage, depending on the size of the outer surface of the anti-rust paint patent leather shedding area to determine whether the method of paint repair or re-painting machine repair method. â‘¡ construction machinery working equipment, such as paver screed, loader bucket, scraper scraper, etc., on the bare metal rust is smear butter.