Agricultural Machinery Parts Casting Agricultural Machinery Parts Casting,Agricultural Machinery Parts,Agricultural Investment Casting Lost Wax,Agricultural Parts Lost Wax Castings Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com
Benefication Chrome Rock Mine Processing Plant Chrome Rock separator
1. Description
Spiral concentrator is our company's concentrating experienced scientific product, which is the best concentrating equipment, especially for concentrating sand ore in beach, riverside, seashore and stream.
The product is made of the fiberglass lined with wear-resistant polyurethane and corundum cover; the advantages are light, moisture proof, anti-rust, wear proof, anti corrosion and no noise, properly suitable for the different feeding particle sizes and grades. It is the domestic advanced level, the new highly effective equipment.
2. Features
1).Reasonable structure and small occupation area.
2). High recovery, high efficiency, and precise separation.
3). Light in weight, rust and corrosion resistant.
4). Simple installation and Minimal maintenance requirements.
5). Low operating cost and long operating life.
6). Reliable running with minimal operator attention.
7). Strong adaptability to fluctuation of feeding amount, density, size and grade.
3. Working principle :
Spiral Chute is working under the the force of water flow, gravity, inertial centrifuge and friction. Slurry is pumped to the top of the spiral , and it enters a feed distributor that evenly distributes the feed to each spiral concentrator. The design and shape of the spiral make it work, when combined with gravitational acceleration. As the slurry travels the spiraling path down the spiral, mineral grains settle and start sorting according to size, density and to a lesser extend shape. Low density particles are carried with the bulk of the water towards the outside of the spiral , while particles with the greatest density migrate towards the inside of the spiral.
4. Application:
1). Rutile, ilmenite and zircon concentration
2). Iron ore, chromite and manganese beneficiation
3). Tin, tantalum and ore concentration
4). Gold, native copper and base metal recovery
5). Silica sands processing
6). Titano-magnetite concentration
5. Technical Data
Â
Â
-1200
5LL-900
5LL-600
5LL-400
Outside dia(mm)
1500
1200
900
600
400
pitch(mm)
540, 720
900, 720, 540
675, 540, 405
450, 360, 270
240, 180
Pitch Dia Ratio
0.75, 0.6, 0.45
0.75, 0.6, 0.45
0.75, 0.6, 0.45
0.75, 0.6, 0.45
0.6, 0.45
Lateral slope
9°
9°
9°
9°
9°
Maximum starts per column
4-2
4-2
4-2
3
2
Feeding Size(mm)
0.3-0.02
0.3-0.03
0.3-0.03
0.2-0.02
0.2-0.02
Feeding Density(%)
25-55
25-55
25-55
25-55
25-55
Capacity(T/H)
8-6
4-6
2-3
0.8-1.2
0.15-0.2
External
SizeLength(mm)
1560
1360
1060
700
460
Width(mm)
1560
1360
1060
700
460
Height(mm)
5230
5230
4000
2600
1500
Weight (Kg)
800
600
400
150
50
6. Packing & Loading                                              Â
- Container
40HQ/40GP/20GP
- Load Port
Xiamen ,Guangzhou, Shenzhen,Shanghai or at customers' request
7. Our Company & Customers Visiting                                 Â
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
Experienced mining machinery manufacturer
Our distinctive prodcts include shaking table, Jig, Spriral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, feeder, classifier, ore washing machine and lab equipment ect. Our machines are popular in separating GOLD, copper, manganes, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite,ect.
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
8. FAQ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Q:Â What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
 A:1). What type is the mining? Is it rock stone? or it is sand?
  2). If rock stone,What is the general particle size(mm) of the raw ore?
  3). What is the handling capacity(tons per hour) you plan to work with?
  4).What is the elements of the raw ore? How much percent % of each minerals?
Q:Â Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A:Â Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
Q:Â How long is the warrenty of your equipments? Does your company supply the spare parts?
A:Â The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q:Â If i need the complete mineral processing line. is Gelin able to help us build it?
A:Â Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.Â
      Â
Welcome to visit our factory in your free time!
Â
Benefication Chrome Rock Mine Processing Plant Chrome Rock separator
1. Description
Spiral concentrator is our company's concentrating experienced scientific product, which is the best concentrating equipment, especially for concentrating sand ore in beach, riverside, seashore and stream.
The product is made of the fiberglass lined with wear-resistant polyurethane and corundum cover; the advantages are light, moisture proof, anti-rust, wear proof, anti corrosion and no noise, properly suitable for the different feeding particle sizes and grades. It is the domestic advanced level, the new highly effective equipment.
2. Features
1).Reasonable structure and small occupation area.
2). High recovery, high efficiency, and precise separation.
3). Light in weight, rust and corrosion resistant.
4). Simple installation and Minimal maintenance requirements.
5). Low operating cost and long operating life.
6). Reliable running with minimal operator attention.
7). Strong adaptability to fluctuation of feeding amount, density, size and grade.
3. Working principle :
Spiral Chute is working under the the force of water flow, gravity, inertial centrifuge and friction. Slurry is pumped to the top of the spiral , and it enters a feed distributor that evenly distributes the feed to each spiral concentrator. The design and shape of the spiral make it work, when combined with gravitational acceleration. As the slurry travels the spiraling path down the spiral, mineral grains settle and start sorting according to size, density and to a lesser extend shape. Low density particles are carried with the bulk of the water towards the outside of the spiral , while particles with the greatest density migrate towards the inside of the spiral.
4. Application:
1). Rutile, ilmenite and zircon concentration
2). Iron ore, chromite and manganese beneficiation
3). Tin, tantalum and ore concentration
4). Gold, native copper and base metal recovery
5). Silica sands processing
6). Titano-magnetite concentration
5. Technical Data
Â
Â
-1200
5LL-900
5LL-600
5LL-400
Outside dia(mm)
1500
1200
900
600
400
pitch(mm)
540, 720
900, 720, 540
675, 540, 405
450, 360, 270
240, 180
Pitch Dia Ratio
0.75, 0.6, 0.45
0.75, 0.6, 0.45
0.75, 0.6, 0.45
0.75, 0.6, 0.45
0.6, 0.45
Lateral slope
9°
9°
9°
9°
9°
Maximum starts per column
4-2
4-2
4-2
3
2
Feeding Size(mm)
0.3-0.02
0.3-0.03
0.3-0.03
0.2-0.02
0.2-0.02
Feeding Density(%)
25-55
25-55
25-55
25-55
25-55
Capacity(T/H)
8-6
4-6
2-3
0.8-1.2
0.15-0.2
External
SizeLength(mm)
1560
1360
1060
700
460
Width(mm)
1560
1360
1060
700
460
Height(mm)
5230
5230
4000
2600
1500
Weight (Kg)
800
600
400
150
50
6. Packing & Loading                                              Â
- Container
40HQ/40GP/20GP
- Load Port
Xiamen ,Guangzhou, Shenzhen,Shanghai or at customers' request
7. Our Company & Customers Visiting                                 Â
Ganzhou Gelin Mining Machinery Co., Ltd is an expert manufacturer of mining machines in China. Our company is located in Guzhang Industrial Zone, Shicheng county, Jiangxi province, covering an area of over 30000 square meters, having more than 30 sets of heavy processing equipment and with an annual outpurt of more than 2000 sets of mining machinery.
Experienced mining machinery manufacturer
Our distinctive prodcts include shaking table, Jig, Spriral separator, Gold concentrator, Ball mill, Jaw crusher, flotation, magnetic separator, feeder, classifier, ore washing machine and lab equipment ect. Our machines are popular in separating GOLD, copper, manganes, chrome, tungsten, tin, nickel, iron, titanium, lead, zinc, tantalum and some non-ferrous metals like quart, zircon, barite,ect.
--- PRE-SALE SERVICE ---
1.Based on clients' request and budget, GELIN experts will strictly make efficient, reliable solutions accordingly;
2.Mine sample testing is available, we welcome the customer send the sample to you for testing by courier, or, the customer take the sample to our factory for testing;
3. Design and provide the complete processing flowchart;
4. Design & manufacturer products according to clients' demands.
--- AFTER-SALE SERVICE ---
1.Pre-check and test the products before delivery;
2.Deliver the whole plant design for our clients which including infrastructure, electrical system and pipeline system design;
3.Trace the status of the shipping until the products received;
4.Prepare required documents to let clients pass custom clearance;
5.Dispatch experts to carry out below service on site:
1) Installation & debug of the machinery
2) Train the first-line operators & technical personnel
3) Carry out any other service clients may need
6. Provide technical exchanging & spare parts for life-long term
--- ONE STOP SOLUTION ---
1.Starting by running the mineral beneficiation experiment. To provide our clients with the best solution accordingly;
2.Besides supply the flowchart design & equipment, we also provide the infrastructure design; Electrical & pipeline system design, etc. To help our clients complete the design of the whole plant;
3.After the installation, debugging of the equipment, the official production will also be guiding by our experienced engineers on site, to guarantee the output minerals perfectly meet your demands.
8. FAQ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
Q:Â What Information should customers give to us in order to let we provide you with efficient & suitable quotation and assistance.
 A:1). What type is the mining? Is it rock stone? or it is sand?
  2). If rock stone,What is the general particle size(mm) of the raw ore?
  3). What is the handling capacity(tons per hour) you plan to work with?
  4).What is the elements of the raw ore? How much percent % of each minerals?
Q:Â Can we send the mineral samples to your company, let your company run the ore-dressing experiments test for us?
A:Â Yes, we can run the ore-dressing experiments for our customers. After the test, we will based on the results to give you the reasonable flowchart, suitable solution and equipments selection. etc.
Q:Â How long is the warrenty of your equipments? Does your company supply the spare parts?
A:Â The warranty period of Gelin equipments is one year. And of course we will supply the spare parts for you for life-long time at lowest cost.
Q:Â If i need the complete mineral processing line. is Gelin able to help us build it?
A:Â Yes, we can help you combine a complete mineral processing line. and give you related professional advices as long as you need.
There is a rich experience engineer team of us. we had already build many mining projects in China & Overseas. You can believe our quality and service.Â
      Â
Welcome to visit our factory in your free time!
Â
Benefication Chrome Rock Mine Processing Plant Chrome Rock Separator
Model NO.: chromite machine
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Red
Customized: Customized
Condition: New
Quality: High Quality
Mining Object: Metallic and Non-Metallic Ore Excavator
Brand Name: Gelin
Application: Mining Concentration
Trademark: Gelin
Transport Package: Nude/ Container/ as Request
Specification: STANDARD
Origin: Made in China
HS Code: 8474100000
Model NO.: chromite machine
Energy Saving: Energy Saving
Warranty: 1 Year
Color: Red
Customized: Customized
Condition: New
Quality: High Quality
Mining Object: Metallic and Non-Metallic Ore Excavator
Brand Name: Gelin
Application: Mining Concentration
Trademark: Gelin
Transport Package: Nude/ Container/ as Request
Specification: STANDARD
Origin: Made in China
HS Code: 8474100000