Plastic Twist Electric Meter Seal (KD-604)

Product Description

Type	Plastic security water and electric meter twist lock seal (KD-601)
Material	PC & ABS
Size	    1.Available to Print Flag Dim:  22mmX8mm 2.Wire Strengh: F> 14KG 3.Removal by cable/bolt cutters 4.Operating Temperature: -40°c to 110°c / -40°F to 230°F 5.Metallic spiral wire:stainless steel wire coated plastic, iron wire, copper wire. 6.Printing by laser etching
Color	red, yellow, green, blue and white, etc.
Packing	Standard: 100pcs/bag 50bags/carton Carton specification: 50cm X 40cm X 27cm  Weight:13.6kg

Similar products





Working


 

Multi Color Molding

In the silicone industry, to meet the user experience of the majority of consumers, multi-color products have always been the best-selling products, the process is used in silicon materials bonding and plastic bonding.

1. Soft and hard plastic two-color design
The two materials must have a certain temperature difference in the melting point. Generally, it is recommended to reach 60°. It is recommended to be at least 30°. The melting temperature of the first shot material is high. Generally, the first shot is PC or PC/ABS, and the second shot is TPU or TPE, PC thickness is 0.6-0.7mm, soft rubber part thickness is required to be 0.4mm or more.
Try to widen the contact area, make grooves to increase the adhesion, or use the core for the first shot, and the second part of the material is injected into the first shot. The surface of the first shot is as rough as possible.
2. Material compatibility
Multi-color injection molded mating materials must meet two basic compatibility conditions. They are compatible with the adhesive compatibility and processing.
3. Transparent and non-transparent two-shot design
(1) Double shot design of small lenses
The first shot is non-transparent, and the second shot is made of a lens. The first shot uses a PC with a high melting point and the second shot uses a PMMA.
(2) Transparent and non-transparent bijective design for decoration
The first shot is a non-transparent material, the second shot is a transparent material, and the non-transparent material is generally a high temperature of the PC material of SABIC, and the second shot transparent material is PMMA or PC. The PC needs to be sprayed with UV to protect it. PMMA can choose uv or fortification. If there are characters on the surface, you must choose UV

In the silicon bonding area, several silicon materials will be used to achieve different color silicon, different rubber components, so the multi_k color process is commonly used and is quite popular.

Multi Color Molding,Multi Colour Injection Moulding,Multi Color Injection Molding,Multicolor Injection Molding

Suzhou FCE precision electronics Co., LTD , https://www.fcesz.com