Wenzhou Deli Machinery Equipment Co., Ltd. , https://www.sungoodtech.com
Model
Max Feed Size
(mm)
Output Size
(mm)
Capacity
(T/h)
Motor Power
(kw)
PC
70
100-150
≤
20
15-25
30
PC
90
100-150
≤
20
30-60
45
PC
120
100-200
≤
20
50-90
55
PC
135
100-200
≤
20
60-100
75
PC
150
100-200
≤
20
90-120
110
PC
180
100-300
≤
25
100-150
150
PC
210
100-300
≤
25
120-180
220
Pcf-240 Heavy Limestone Quarry Lime Feldspar Hammer Crusher
Model NO.: PCF-240
Inlet Size: 600×900mm
Condition: New
Trademark: TSDC
Transport Package: No
Specification: PCF-240
Origin: Tangshan
HS Code: 84742090
The PCF-240 hammer crusher is a high-efficiency crushing equipment designed for processing large-sized materials into smaller, uniform particles. It consists of a robust frame, rotor assembly, support iron, and grate bars. The frame is constructed from steel plates that are cut and welded to form two parts — the upper and lower sections. Inside the frame, high-manganese steel liners are installed and can be easily replaced when worn out.
The rotor is composed of turn plates, pin shafts, and hammers arranged in a regular pattern along the main shaft. A motor and triangular belts drive the main shaft, which rotates the rotor at high speed. As large materials enter through the feeding inlet, they are first impacted by the high-speed hammers and then thrown against the support iron for further crushing. This multi-stage process ensures efficient size reduction.
Qualified materials pass through the gaps in the grate bars and exit the machine, while unqualified ones remain in the crushing chamber for continued impact and grinding until they meet the desired particle size. The output size can be adjusted by replacing different grate bars, and the gap between the rotor and the grate bars can also be modified according to specific requirements. To prevent clogging, the moisture content of the material should not exceed 20%.
This type of crusher is widely used in industries such as cement, chemical, power, and metallurgy, especially for fine crushing applications. It is suitable for processing materials like coal, salt, chalk, plaster, bricks, tiles, and limestone. It can also crush fibrous or elastic materials such as wood, paper, and waste. In some cases, it can be replaced with a cone crusher depending on the application needs.
Below is a detailed specification table for various models: