Passenger vehicle sales in August increased by more than one million SUVs by 76% year-on-year

According to statistics from the National Association of Passenger Car Markets in August, according to statistics from the National Passenger Car Market Joint Meeting, August passenger car sales volume was 1.007 million units, an increase of 18.5% year-on-year, of which MPV series products continued to increase by 66.9%, while sedan products With a total sales of 5.66 million units, demand for SUV products continued to grow by 76.1% year-on-year.

Passenger car sales in August increased by more than one million SUV by 76% year-on-year

According to statistics from the National Association of Passenger Car Markets, the total passenger car production in August 2010 was 977 thousand units, which was a 14% increase from the same period of last year and a decrease of 1.3% from July. Among them, the output of SUV products grew the most rapidly, with a year-on-year increase of 82.1%, which also reflected the current strong demand for SUV market. In the past, the increase in the MPV, which was less of a concern, was relatively large, reaching 75.2%. The growth of the sedan series is still slow, with an increase of only 8.1% year-on-year, far below the market growth average.

Passenger car sales in August increased by more than one million SUV by 76% year-on-year

From the perspective of sales statistics, it is basically in line with changes in production. In the first half of the year, sales reached 1.007 million units, a year-on-year increase of 18.5%. The growth of SUV products is the most eye-catching, with a year-on-year increase of 76.1 to 110,000 units. MPV still performed well. In the first half of the year, total sales have increased to 260,000 units. The sedan series, as reflected in production, grew by only 14.7% year-on-year.

Passenger car sales in August increased by more than one million SUV by 76% year-on-year

According to sales statistics, we can see the performance of automakers in August 2010. The top five sellers were Shanghai Volkswagen, FAW-Volkswagen, Shanghai GM, Dongfeng Nissan and Beijing Hyundai. Shanghai Volkswagen has become a dependant on new vehicles such as Tiguan. August sales champion, while FAW-Volkswagen and Shanghai GM became runners-up and third runners-up. Dongfeng Nissan won the fourth place with comprehensive coverage of products. Beijing Hyundai relied on Yuet Sports and iX35 and other models were still ranked fifth in the rankings, and FAW. Toyota won sixth place with strong promotion.

Passenger car sales in August increased by more than one million SUV by 76% year-on-year

In terms of sales of general passenger cars, Shanghai GM Wuling continues to occupy the first position. The top three narrow passenger vehicles occupy 2-4 seats respectively, and Changan Automobile continues to slide down to eighth place. Although the market for micro-subs has declined, production and sales have been basically balanced. Under such circumstances, prices will not go down. Therefore, the Chinese passenger car market is now in a stable state of operation.

For the September sales forecast, the passenger car market joint committee estimated that sales in September could increase by approximately 4.7%, coupled with many favorable factors of Jinjiu and the promotional role of energy-saving vehicle subsidies to fully play, but the market has already had early heat in August. In September, the year-on-year and quarter-on-quarter market growth may be reduced.


IS series single stage single suction Horizontal Centrifugal Water Pump is provided in accordance with international standards IS02858 performance and size of the design, its technical standards are to international standards, reached to the international advanced level. It's chinese  promotion of energy-saving pumps. 

Multistage Centrifugal Pump are  single  suction multistage  segmental  centrifugal  pumps which  adopt  energy-efficient  hydraulic  model,  they  conform  to  GB/T5675 《Centrifugal  Pump  Technical  Condition  III》,  with wide  performance  range,  high efficiency,  reasonable  structure,  safe  and steady  operation,  low  noise,  long  life performance  and  easy  installation  and maintenance.

Single-stage double-suction split-casing centrifugal pumps are used to pump the clear water or other liquids with similar physical and chemical properties as clear water. The temperature of transported liquid shall not exceed 80. It is applicable for factory ,mine, city water supply,power station, irrigation and drainage of farmland and various water conservancy projects. Applicable for factories ,mines,urban water supply, power stations, waterworks,agricultural irrigation and drainage, and other water conservancy projects.

Multi Stage Vertical Centrifugal Pump is suitable for the circulation and pressurization of cold and hot clean water in high-pressure operation system, water supply under parallel operation of several pumps in high-rise constructions, water supply for fire control and boilers, cooling water system, and the delivery of various washing liquids. Pump material:  

Flow-Through: Cast Iron/Stainless Steel          Body: Stainless Steel









Centrifugal Water Pump

Water Pressure Pump,Portable Water Pump,Centrifugal Water Pump,Horizontal Centrifugal Water Pump

Shijiazhuang Boda Industrial Pump Co., Ltd. , http://www.mineralslurrypump.com