Lnnd Hydraulic Atomizing Nozzle Fine Misting Nozzle

Products Information:

The core and orifice tip design produces a hollow cone spray of very fine droplets using liquid pressure alone. The metal series are available with or without an integral strainer, and with a medium or extra wide spray angle. Separate nozzle heads have a straight thread for connection to the pipe threaded nozzle body. This enables them to be removed for cleaning easily and replaced without the use of pipe joint sealant. Nozzles are available with 1/4" male or female BSPT/NPT, and with flow rates from 3.1 to 230 L/hour at 20bar. MLNN nozzles include an integral strainer screen. Nozzle orifice and core tip are stainless steel with the body and cap in brass or 303 stainless steel.

Specifications:

Material : brass ,stainless steel 
Inlet size: 1/4" male or female



Feature:
1. Without air's supplementary, system device is simple.
2. Fog's droplets' diameter ranges from 3-70UM, and spray fully.
3. Energy and water saving, low cost and good effects.
4. Non-blocking and anti-drop.
5. Nozzle tip uses wear-resistant materials, and service life is 2.5 times of similar nozzle.

Application:
Textile workshop humidification
Stock farm cooling sterilize
Man-made fog sight
Vegetable retain freshness
Dust removing
poultry house

Horizontal Briquette Machine

We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal Briquette Machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
5) high output.

Horizontal Briquetter, Horizontal Briquetting Press, Horizontal Briquetting Machine, Horizontal Block Making Machine, Horizontal Briquette Making Machine

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.yjhydraulicn.com