How to eliminate the harm of formaldehyde in decoration

In order to eliminate formaldehyde after decoration, prevention is the key to prevention. At present, indoor pollutants mainly include formaldehyde, benzene, ammonia, and TVOC. Among them, formaldehyde is listed as a highly toxic substance by the National Health Organization. Indoor pollution of formaldehyde has become a top priority. That should pay attention to the hazards of formaldehyde in the decoration, Xi'an Ding Run environmental protection on how to eliminate the harm of formaldehyde in the decoration to give you a few points and suggestions

1, it is necessary to pay attention to interior decoration and decoration design. We must design according to the principles of safety, health, simplicity, and comfort. The principle of energy conservation should also be taken into consideration. Natural light should be used for indoor lighting as much as possible, and reasonable decoration materials should be used to reduce the amount of man-made boards. Full consideration should be given to the carrying capacity of indoor space, to prevent over-decoration, to ensure ventilation and fresh air volume, and to improve indoor air quality.

2, it is necessary to pay attention to interior decoration materials selection and construction supervision. It is necessary to use non-toxic, less toxic, non-polluting, and less polluting decoration materials as far as possible, strictly inspect the indicators for the release of harmful gases, or perform necessary tests. Do not rely on the so-called green building materials or green indoor environmental protection materials under non-detection conditions. Depending on how easy it is to smell, see, hear, etc., it is still possible to discriminate the quality to some extent. The construction process must be supervised to prevent the use of poor quality plastic or poor quality materials. Therefore, before use or after cutting, it is best to use a formaldehyde scavenger that is suitable for the use of plates, and apply it after brushing. It is better to use less dashes. If the formaldehyde level of the composite floor exceeds the standard, formaldehyde scavenger suitable for the floor shall be used for treatment.

3, is to focus on the purchase of indoor furniture. The purchase of furniture should not be excessive, and new furniture itself must release a large amount of toxic and harmful gases. Try not to use furniture produced by Daxinban because it will be difficult to control if the Daxinban exceeds the standard. The newly purchased furniture should also be treated with formaldehyde, and other odors should also be properly handled. This is often more professional. Furniture deodorant can comprehensively drive out various odors inside the furniture.

4, is to focus on indoor environmental testing and governance. Don't rush to check in after buying new homes, furniture and decorating your new home. Under normal circumstances, the new house pollution concentration exceeds the national standards, and pollution will gradually decrease with the passage of time and air convection. Therefore, new or newly installed houses should be fully ventilated, and at least one month after the completion of the necessary tests. Only after passing the test basically can you stay. If you are eager to use the room, you must stay in the indoor environment before you check in.

5, there are economic conditions available for the effective use of indoor air purification facilities. In addition to the above needs to pay attention to, the following three are the habits after the stay: First, frequent ventilation, improve indoor health; the second is to choose to plant flowers, keep pets. Three carefully choose to use home appliances, less accumulated collection of strange stone monsters.

Steel Recycling Machine

For steel scraps, whether it's turnings, chips, filings, shavings, cuttings, sawdust, drillings, borings, debris, granules or sludge, Ecohydraulic steel recycling machine can help. If your scraps are small chips, you can choose our Steel Briquette Machine to press your chips to be small blocks. If your scraps are shavings or turnings, you can choose our Steel Baler to press your chips to be square bales, if your scraps are big like pipe tube sheet plate rebar, etc., you can choose our steel shear to cut your scraps to be smaller pieces.

Steel Shavings Recycling Machine, Steel Turnings Recycling Machine, Steel Scraps Recycling Machine, Steel Chips Recycling Machine, Waste Steel Recycling Machine

Jiangyin Metallurgy Hydraulic Machinery Factory , https://www.ecobriquetter.com