Hand Spray Car Rubberized Undercoating for Car Care

Model NO.: rubberized undercoating
Trademark: Tonyin
Transport Package: Carton
Specification: 650ML
Origin: Made in China
HS Code: 3405200000
Model NO.: rubberized undercoating
Trademark: Tonyin
Transport Package: Carton
Specification: 650ML
Origin: Made in China
HS Code: 3405200000
HAND SPRAY CAR RUBBERIZED UNDERCOATING
NAME ITEM NO. PACKAGE SPECS CBM/BOX QTY/20GP  (BOXES) QTY/40HQ  (BOXES)
Oilness,black DP001650ML500G 650ML(500G)*24 0.017 1647 4117
Oilness gray DP002650ML5000G 0.017 1647 4117

The Real Product Show
Hand Spray Car Rubberized Undercoating for Car CareHand Spray Car Rubberized Undercoating for Car CareHand Spray Car Rubberized Undercoating for Car Care

Features:
  Tough black coating for vehicle, under-body protection. Protects against stone chips, rust and salt corrosion, Wildly used around automotive chassis and industry filed.

Directions:
  1. Keep the place where need to spray dry, clean, no oil blot and film, and covering the place where no need to spray.
  2. Shake before use and let ball inside can roll freely. Shake during working.
  3. Try out on waste object.
  4. Fully shake and spray on the object at a distance of 20-30cm. Spray thin film on the object repeatedly will be better then spray thick film on the object at one time.
  5. Work in the temperature between21ºC to 32C ºCcan get the best effect, places where be sprayed by mistake can be cleaned by rag with water or volatile liquid.
  6. If a mount of content can't be sprayed out before it almost be used up, you can press the spray nozzle,upside down the can and spray 2-3 seconds.
  7. After use, clean the spray nozzle ,upside down it and spray till clean air can be found.
  8. This product can get dry about 4-6 hours after use, and the exact time will depend on temperature.
Precaution:
1.Don't puncture and burn the can.
2.Don't use it near the flame ,forbid long time exposure to sunlight,  storage in high temperate (above 49ºC).
3.Avoid contact with eyes, skin and clothing.Do not swallow it.
4.Use it in well-ventilated area.if find it's hard to breath during using,please stop and be away to breath fresh air. 5.if no remission please see doctor immediately.
6.If eyes contacted,rinse with water at least 15 minutes and go to the hospital immediately.if skin contact, wash it
   by water.

7.Keep out of the reach of children.
8.After using, spray paint on the surface to get more beautiful.
9.Should not be used on the catalytic converter, exhaust system, engine, rotating shaft and other extremely high
    temperature parts.

10.No long time storage in the boot of the car .

About Tonyin:
Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength". It consists of Qingdao Tonyin Industrial Co., Ltd. (International marketing) and Shenzhen Tonyin Technology Co., Ltd. (R&D, manufacturing and domestic marketing). Both are a collection of scientific research, development, production and sales of high-tech enterprises, located in Qingdao city, Shandong province and Shenzhen city, Guangdong province respectively, have passed the identification of "ISO9001: 2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational, health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc., and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international quality standards.

The main brand TONYIN is for Car Care & Maintenance products which cover 10 series of nearly one hundred kinds of Car Care & Maintenance products, trying to meet all aspects of demands, such as daily quick repair, clean, beautifying and maintenance, car air treatment, fuel system conservation and DIY emergency treatment etc. Tonyin group sincerely welcome all customers to come and visit, hoping to gain a sincere cooperation, mutual-benefits and win-win results.

Factory Tour:
Hand Spray Car Rubberized Undercoating for Car Care



 
 
 
HAND SPRAY CAR RUBBERIZED UNDERCOATING
NAME ITEM NO. PACKAGE SPECS CBM/BOX QTY/20GP  (BOXES) QTY/40HQ  (BOXES)
Oilness,black DP001650ML500G 650ML(500G)*24 0.017 1647 4117
Oilness gray DP002650ML5000G 0.017 1647 4117

The Real Product Show
Hand Spray Car Rubberized Undercoating for Car CareHand Spray Car Rubberized Undercoating for Car CareHand Spray Car Rubberized Undercoating for Car Care

Features:
  Tough black coating for vehicle, under-body protection. Protects against stone chips, rust and salt corrosion, Wildly used around automotive chassis and industry filed.

Directions:
  1. Keep the place where need to spray dry, clean, no oil blot and film, and covering the place where no need to spray.
  2. Shake before use and let ball inside can roll freely. Shake during working.
  3. Try out on waste object.
  4. Fully shake and spray on the object at a distance of 20-30cm. Spray thin film on the object repeatedly will be better then spray thick film on the object at one time.
  5. Work in the temperature between21ºC to 32C ºCcan get the best effect, places where be sprayed by mistake can be cleaned by rag with water or volatile liquid.
  6. If a mount of content can't be sprayed out before it almost be used up, you can press the spray nozzle,upside down the can and spray 2-3 seconds.
  7. After use, clean the spray nozzle ,upside down it and spray till clean air can be found.
  8. This product can get dry about 4-6 hours after use, and the exact time will depend on temperature.
Precaution:
1.Don't puncture and burn the can.
2.Don't use it near the flame ,forbid long time exposure to sunlight,  storage in high temperate (above 49ºC).
3.Avoid contact with eyes, skin and clothing.Do not swallow it.
4.Use it in well-ventilated area.if find it's hard to breath during using,please stop and be away to breath fresh air. 5.if no remission please see doctor immediately.
6.If eyes contacted,rinse with water at least 15 minutes and go to the hospital immediately.if skin contact, wash it
   by water.

7.Keep out of the reach of children.
8.After using, spray paint on the surface to get more beautiful.
9.Should not be used on the catalytic converter, exhaust system, engine, rotating shaft and other extremely high
    temperature parts.

10.No long time storage in the boot of the car .

About Tonyin:
Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength". It consists of Qingdao Tonyin Industrial Co., Ltd. (International marketing) and Shenzhen Tonyin Technology Co., Ltd. (R&D, manufacturing and domestic marketing). Both are a collection of scientific research, development, production and sales of high-tech enterprises, located in Qingdao city, Shandong province and Shenzhen city, Guangdong province respectively, have passed the identification of "ISO9001: 2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational, health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc., and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international quality standards.

The main brand TONYIN is for Car Care & Maintenance products which cover 10 series of nearly one hundred kinds of Car Care & Maintenance products, trying to meet all aspects of demands, such as daily quick repair, clean, beautifying and maintenance, car air treatment, fuel system conservation and DIY emergency treatment etc. Tonyin group sincerely welcome all customers to come and visit, hoping to gain a sincere cooperation, mutual-benefits and win-win results.

Factory Tour:
Hand Spray Car Rubberized Undercoating for Car Care



 
 
 

Advanced technology and optimal design in harmony. 

8.4 inch touch screen display in English,usar-friendly interface. 

The use of multi CPU control, the high system response speed, high control accurancy, positioning accurancy 0.01mm. 

We offer five servo motor robot controller, three servo motor robot contorller, two servo motor controller, and single motor robot controller. 

The machine parameters, mold number procedures can be imported and exported through the U disk in different machines. 

U disk upgarde, customer can upgrade trhe latest system, continue to get stable support. 

HIgh speed of I/O transmission technology, so that the robot speed is faster, can shorten the cycle time of more than 10 %. 

The control precision is greatly improved, the control precision of all the time is up to 0.01 seconds. which can be more accurate with the mold out of product, shorten the time to remove the robot, improve the efficiency of the injection molding machine. 

Robot And Conveyor For Plastic Parts

Robot And Conveyor For Plastic Parts,Conveyor For Plastic Parts,Conveyor Spare Parts Use In Plastic,Plastic Conveyor Products

Ningbo Tongyong Plastic Machinery Manufacturering Co. Ltd. , https://www.tongyongmachinery.com